(Updated 25/05) - yiff.party is changing: click here to learn more about the new exclusions policy.
May 2020 donation progress: $111.38/$250 (45%). Click to learn more...
close
Hello! Thank you for using yiff.party!

We hope you enjoy using it. yiff.party operates on a non-profit basis, and as such, all the server expenses are paid by our users. We don't want to run ads or infect you with crypto miners. We depend on users like you to keep the site running, and to preserve years and terabytes of amazing content—some of which is no longer available from its original creators!

Because of the nature of the site, many users are reluctant to donate. That's OK! yiff.party was created so everyone can enjoy the content we host without any restrictions or paywalls. But if you value the service we provide, and are able to, we—and our users—would be tremendously grateful if you considered making a donation.

Donation progress for May 2020

So far, approximately $111.38 has been raised out of our target of $250.00. We're about 45% of the way there! Please note: this tracker is updated manually—don't worry if your donation doesn't show up immediately!

yiff.party's server costs are due on the last day of each month. So, we need to meet this goal before 31 May!

How to donate?

At this time, yiff.party can only accept donations in numerous cryptocurrencies. Please select a currency below to display the relevant donation address.

Bitcoin (BTC)
Bitcoin Cash (BCH)
Ethereum (ETH)
Ethereum Classic (ETC)
Litecoin (LTC)
Why can't I donate through other means (eg. PayPal)?

Due to the nature of sites like yiff.party, it is very difficult to find payment processors who will accept clients like us. If we were to accept donations via PayPal, it wouldn't take more than a day for someone to submit an abuse report and get our account frozen. Until a viable way of accepting monetary donations becomes available, cryptocurrency will remain the only option.

There are many resources available on how to purchase crypto. For Bitcoin, check out bitcoin.org's page on buying Bitcoin for a list of methods. For beginner Bitcoin users, yiff.party recommends using an escrow service such as LocalBitcoins.

Cast N Play's avatar
Cast N Play (castnplay)

Checking creator status...

Should this creator remain on yiff.party?

In line with yiff.party's exclusions policy, certain creator categories are being removed from yiff.party. Please indicate below whether you believe this creator falls under the exclusion policy. If you are unsure, please do not vote. Misuse of voting privileges may result in banishment.

checkKeep on yiff.party closeRemove from yiff.party

close
Enjoying castnplay's content?

Creators like castnplay work hard to produce the content you are viewing on yiff.party for free. If you like what you see, consider supporting castnplay on Patreon to encourage them to create more great content!

Monthly Painting Contest Reminder! (RESIN PRINTERS, FREE SUBS & MORE)
Monthly Painting Contest Reminder! (RESIN PRINTERS, FREE SUBS & MORE)more_vert
2020-05-22T15:28:51+00:00
Post file flag
Monthly Painting Contest Reminder! (RESIN PRINTERS, FREE SUBS & MORE) 2020-05-22T15:28:51+00:00close

*Image is from a previous contest
Guys, this is just a friendly reminder that we're running a painting contest with AWESOME prizes.

All you need to do is paint one of the Heroes Vol.1 Minis and post a picture (or more) of it to our Facebook Group!


Prize pool:

1st Place: Anycubic Photon Zero + Wash & Cure Machine + Free Patreon Month

2nd Place: Anycubic Photon Zero + Free Patreon Month

3rd Place: Pro Acryl Expansion Set #1 + Free Patreon Month

4th to 10th: Free Patreon Month

The deadline will at 11:59 pm CST on May 27th, 2020.

Here's a link to the
rules.

Comments (7)
user avatar
User #35650538 - 22 May 20 15:37
New kid with only an old tevo tarantula, but I'm gonna try.
user avatar
castnplay - 22 May 20 15:38
We’ll be running monthly contests. I’m sure you can use them as an excuse to brush up your painting skills :D
user avatar
User #4235556 - 22 May 20 15:46
What a beautiful paint job on that one!
user avatar
castnplay - 22 May 20 17:34
Right?
user avatar
User #21482891 - 22 May 20 22:37
About the rules, it says no digital editing, but are we allowed at least to crop the picture ?
user avatar
castnplay - 22 May 20 23:44
Yes :)
user avatar
User #28246459 - 22 May 20 20:49
Forgot how good Marie-Claudes paint job was - amazing. Hopefully have my replacement lead screw here for next month so I can embarrass myself :)
Pre-Supported Bandits (Throwback) are up!
Pre-Supported Bandits (Throwback) are up! more_vert
2020-05-21T06:06:15+00:00
Post file flag
Pre-Supported Bandits (Throwback) are up! 2020-05-21T06:06:15+00:00close

Thank you all for your patience. Being a complete extra collection and having to change some older models to ensure successful prints we had to take a bit of extra time to make improvements to the models. I promise you it was worth the wait. (DOWNLOAD)

The files are now uploading to the Pre-Supported Throwback Folder. Enjoy!


One extra announcement:

ALL Pre-Supported Models will be included in the ALL Tiers once we reach the 2200 Patrons Stretch Goal.
I know a lot of you wanted this since we started doing pre-supported, and now it is finally coming.

We just hit the 1800 Patrons and thanks to that, there will be 12 models in the Throwback folder next month. We're already working on pre-supporting them so that we don't make you wait for them like we did this month.

Thank you all for the amazing support!

Comments (15)
user avatar
User #20075849 - 21 May 20 11:16
Will we be switched automatically or do we need to pick the new tier ourselves when this goes down?
user avatar
castnplay - 21 May 20 17:45
Patreon does not allow creators to move patrons from one tier to another one. You will need to manually change.
user avatar
User #25239254 - 21 May 20 18:18
Hammer this in huge bold letters when it happens, even if it shades into spamming. There's always a lot of people that pop up demanding answers and charge reversals after one of these changes, who can't be bothered to glance at updates.
user avatar
User #28555021 - 21 May 20 06:09
Very glad to hear it!
user avatar
castnplay - 22 May 20 02:39
Thanks for acknowledging all the hard word that goes into making the pre-supported releases possible. :)
user avatar
User #337240 - 21 May 20 08:28
I am sad that I can only hit like once :)
user avatar
User #32238478 - 21 May 20 19:37
Thanks so much for the supports on the bandits bundle! After now seeing how much work that would have been, it is totally understandable the time it took. Keep up the great work!
user avatar
User #12242561 - 21 May 20 06:24
Wow great news! Sounds like pre-supported is going to the future of most model patreon!
user avatar
User #14428283 - 21 May 20 13:22
and the best patreon just gets better! I feel you need a separate post just announcing the goal as it's kind of buried in there. You guys are awesome.
user avatar
castnplay - 21 May 20 17:44
Great idea! We'll keep posting it in the upcoming weeks as we get closer to it.
user avatar
User #25110246 - 21 May 20 06:28
For those who are in pre-supported tier how gonna work? No more pre-supported tier and pay the same we used to pay before at normal tier?
user avatar
castnplay - 21 May 20 07:49
That is correct
user avatar
User #34372527 - 22 May 20 03:31
would you ever consider changing the scale of the models to 32mm or releasing a pole on it? I like warhammer sized models, they are easier to paint lol. Supports are awesome but if you scale the models up they remove the supports =[
user avatar
castnplay - 22 May 20 04:37
We are releasing models at 32mm. Pre-Supported STLs can be scaled in Chi Tu and other slicers. I don’t have any issue scaling them :/
user avatar
User #34372527 - 23 May 20 04:52
Youre right, i just tried it again in chitubox. For some reason i feel like last time i tried to adjust the scale with a supported model it deleted all the supports. I dont know what i did wrong but it works now thank god. Thank you for clarifying
Kitbashing Tutorial (Beginner Friendly)
Kitbashing Tutorial (Beginner Friendly)more_vert
2020-05-18T09:26:51+00:00
Post file flag
Kitbashing Tutorial (Beginner Friendly) 2020-05-18T09:26:51+00:00close

This was a highly requested topic during the past days, so here it is! A video on how to Kitbash using zBrush and preparing a model for 3D Printing.

I'll be covering a lot more topics in these videos, make sure you leave a comment with your video suggestions, I'm taking note of all those.

In the video, I will cover the basics of how to Kitbash models using zBrush 2020. Kitbashing is super fun and allows us to come up up with crazy and amazing ideas using pre-existing models.

Make sure you subscribe to the channel. Thanks for reading!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Kitbashing Models for 3D Printing | zBrush 2020

Description
Looking for FREE miniatures? visit: www.gumroad.com/castnplay In this video, I will cover the basics of how to Kitbash models using zBrush 2020. Kitbashing is super fun and allows us to come up up with crazy and amazing ideas using pre-existing models. I'll go through the process of not only merging the models but also preparing it to be 3D Printed. You can learn more about the Premium 3d Printables we release on Patreon and support us with the following link: www.patreon.com/castnplay For individual miniatures and sets, visit www.myminifactory.com/users/castnplay Join our Discord Server: https://discord.gg/5hPWpjA

URL
https://www.youtube.com/watch?v=rB6ZF3TKrqU

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/rB6ZF3TKrqU"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (10)
user avatar
User #22181962 - 18 May 20 13:48
Thank you for taking the time to make this video. Very educational. I would definitely like to see more of this kind of content. Can we download the final kitbashed model somewhere? :)
user avatar
castnplay - 18 May 20 18:11
I'll keep doing more videos like this. I don't think I saved the final model D: Sorry
user avatar
User #13354461 - 18 May 20 11:18
Nice, but not everybody can afford ZBrush, and people willing to spend $400 in a software probably know how to use it. Or am I wrong ?
user avatar
User #930736 - 18 May 20 15:03
Sort of, you can actually pay for a subscription nowadays, it's like $39/month. Plus the zbrush website has some pretty good free tutorials to start with that help. Lot of resources on youtube that also help. I'm still learning how to use it, but there's not a whole lot you need to learn to start with and get something decent, especially if you're kitbashing like this.
user avatar
User #13354461 - 18 May 20 15:06
Yeah, so $39/month, or $180 for 6 months. You could also kitbash with Blender, for free. I mean, ZBrush is de facto the industry standard, yes, but it's nowhere near affordable... And I really hope people willing to pay that much will learn/know how to kitbash using ZBrush...
user avatar
castnplay - 18 May 20 18:10
Buying software does not mean you know how to use it. People learning usually use trials, educational licenses, and things of that sort. Blender is a good option as well is you like it better. :)
user avatar
User #4519108 - 20 May 20 13:57
Awesome video! For me this really helped with a topic I've been curious about. I had not thought about grabbing Zbrush for this kind of things but might honestly do so and use this kitbashing as a springboard for more stuff! Thanks for taking the time to do this!
user avatar
User #7701294 - 19 May 20 06:30
user avatar
User #15373248 - 18 May 20 13:12
I prefer blender. Zbrush is great to sculpt/model, but if you're kitbashing just cut and paste in blender
user avatar
castnplay - 19 May 20 07:43
Hey Nicolaj, I am sorry that you did not like this month. About next month, It has been asked and answered several times in other posts. The Poll is also up with the results and even been answered in the poll post (more than once). 'Tabaxi Heroes will be Raiding The Dragon's Vault'. We are working hard to make an awesome collection. Cheers!
Tips to Sculpt Better Minis!
Tips to Sculpt Better Minis!more_vert
2020-05-14T23:30:59+00:00
Post file flag
Tips to Sculpt Better Minis! 2020-05-14T23:30:59+00:00close

Hello guys, Alex here.

So, I've been meaning to post more on our Youtube channel for the past year, but due to having a full-time job up until last month I was not able to do so.

Now that I left my full-time job I'm 100% dedicated to Cast n Play and posting videos again on Youtube is something I've been wanting to do for a long time now.

(I'll probably be making a video of how it was to leave my day job to focus on Cast n Play)

So, here's the first of many. I know production value is not over the top but I'm sure I'll get better at this as we move forward.

I'm planning more game-centered content than Sculpting but I had to start somewhere.

Question:

What kind of videos would you like to see? Let me know and I'll make my best to keep it consistent.

Thank you all for reading, enjoy the video. Cheers!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
None

Description
None

URL
https://www.youtube.com/watch?v=gk-LFuVBnjQ

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/gk-LFuVBnjQ"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (11)
user avatar
User #627955 - 14 May 20 23:35
great! Videos of sculpting are always welcome :)
user avatar
castnplay - 15 May 20 03:08
Will do! :D Taking notes of all these suggestions
user avatar
castnplay - 14 May 20 23:37
Great suggestions! :D Thx for the kind words, guys
user avatar
User #7973511 - 15 May 20 00:14
Would love to see how you approach 'strange anatomy'. Things that look humanoid but aren't quite humanoid to things that might be so foreign that they cause your brain to melt. And elf ears, how long is too long? Or how exaggerated should they be?
user avatar
User #74076 - 14 May 20 23:36
Very cool! Can you please talk about the softwares you are using?
user avatar
User #25123537 - 14 May 20 23:34
Sounds great! I love videos that prioritize teaching how to think about things including figuring out best practices and the why behind tools and steps, as opposed to step by step blind tutorials. I would rather learn to create a small number of my own recipes than have 100s that I can’t troubleshoot let alone adapt. I’m very excited!
user avatar
User #28736366 - 15 May 20 00:29
Moar sculpting how-to videos! :D
user avatar
User #7243981 - 15 May 20 00:44
Thats great ALex! video tips for modeling thinking on 3D print is a interesting topic to make, Like the kind of details that really matters for sculpt, one of the things that I notes is that there is amazing 3D models out there but all those hours going missing when you printed and painted, I will be great to know your toughts about that process.
user avatar
User #617340 - 15 May 20 17:53
Thanks great tips. Keep it up. Would love to hear more about your tool custom setup. Also really interested in favorite brushes. And would love to hear your tips on posing. Congrats
user avatar
castnplay - 16 May 20 06:32
Geat ideas! I'll add them to the list :D Super pumped to keep releasing videos
user avatar
User #8613311 - 14 May 20 23:39
Great idea. I'd love to see you cover "Why something too thin is a bad idea." "Replace a spear with a metal pin/rod." "Where should the cuts be? Can they can be hidden?" "Round eyes or with pupils" "How to orient a mini so it prints." "Best shapes for pins and sockets"
Heroes Vol.1 Painting Contest (Awesome Prizes) 2020-05-05T20:55:32+00:00

We're happy to bring painting contests back. But this time, they're here to stay.

We will be having a monthly painting contest with awesome prizes and will be adding more to the prize pool as we're able to land partnerships with brands.

Heroes Vol.1 Painting Contest is now open, feel free to post work in progress on Discord and our Patrons Only Facebook Group. (LINKS IN THE BOTTOM)


Prize pool:


1st Place: Anycubic Photon Zero + Wash & Cure Machine + Free Patreon Month

2nd Place: Anycubic Photon Zero + Free Patreon Month

3rd Place: Pro Acryl Expansion Set #1 + Free Patreon Month

4th to 10th: Free Patreon Month


*Please read through these rules carefully*

Rules:

-Print and Paint any character from the current collection 'Heroes Vol. 1'.

-The miniature can be scaled up to 150% of the original scale, NO MORE.

-No digital painting/editing allowed.

-Photographs submitted have to be at least 512x512 pixels in resolution to be considered. There are no restrictions in terms of aspect ratio.

-No restrictions on the printer or printing method. You can use any printer you have.

-The deadline will at 11:59 pm CST on May 27th, 2020.

-Top 10 minis will be posted on the Cast n Play Official Facebook Page on May 29th, 2020.

https://www.facebook.com/castnplayminis/

-Winners will be decided based on total likes in that Official Post. Voting will close on May 31st, 2020, and winners will be announced.

-To enter, post on our Facebook Group a picture of your painted mini using the hashtag #May2020PaintingContest

https://www.facebook.com/groups/1352680144856176/

*(Non-Facebook users, we'll open a Discord channel to post your entries and we'll post them for you on our Facebook Group)

WE WILL NOT CONSIDER ENTRIES IN ANY OTHER PLATFORM OTHER THAN FACEBOOK AND DISCORD.

-While this is not a photography contest, we expect good lit photographs to be able to judge as fair as we possibly can.


Good luck to everyone!


FACEBOOK GROUP
facebook.com/groups/1352680144856176

DISCORD COMMUNITY
https://discord.gg/5hPWpjA


flag
Comments (25)
user avatar
User #724448 - 22 May 20 16:53
I really need to find someone to print some of your wonderful minis for me so I can enter for a chance to win with the hope of one day printing my own.
user avatar
castnplay - 22 May 20 17:34
I'm sure you can find someone over the Discord server that is willing to help!
user avatar
User #26444220 - 7 May 20 19:51
so question. can we add other terrain models for better pictures or do you just want the model itself?
user avatar
castnplay - 8 May 20 04:51
Feel free to add more :)
user avatar
User #20631374 - 6 May 20 00:41
Exciting, another chance to upgrade from my Ender!
user avatar
User #31441848 - 23 May 20 05:41
Is it possible to enter the contest being not a patreon of cast n play?
user avatar
User #10420713 - 6 May 20 06:07
Also the link to the wash and cure machine doesn’t work
user avatar
castnplay - 6 May 20 17:09
Can't get it to work...here's the catalog
user avatar
castnplay - 6 May 20 17:09
https://www.anycubic.com/collections/3d-printers
user avatar
User #10420713 - 6 May 20 17:47
I already know about it, I was just letting you know for other people who try and follow the link, thanks though
user avatar
User #27895847 - 5 May 20 21:35
Do we need a banana for scale? Lol
user avatar
castnplay - 5 May 20 22:01
I would not complain if you did :P
user avatar
User #24696518 - 23 May 20 02:15
damn i forgot about this contest, I'm printing a model asap and getting started
user avatar
User #33436522 - 19 May 20 13:17
Are we allowed to mod the model in any way? Adding horns or the like?
user avatar
castnplay - 19 May 20 17:22
For personal use, no problem. For the contest, please keep it to og models so that it is fair for everyone.
user avatar
User #35345094 - 16 May 20 08:45
Are we allowed only 1 submission or can we submit multiple models so long as they're different models?
user avatar
castnplay - 16 May 20 16:16
You can submit multiple :)
user avatar
User #8217329 - 19 May 20 19:35
Its possible to submit a little diorama with multiple models?
user avatar
User #15327902 - 5 May 20 21:28
How many photos would you like posted?
user avatar
castnplay - 5 May 20 21:33
At least 1. As many as you want
user avatar
User #10420713 - 6 May 20 06:05
So does that mean we can increase the size by 150% or we can only go up to 150% since when you load a model into a slicer it’s already at 100%?
user avatar
castnplay - 6 May 20 17:09
You can go up to 150%
user avatar
User #10420713 - 6 May 20 17:47
Ok cool thanks
user avatar
User #32453580 - 14 May 20 12:41
May I create the base by myself or must I use the Hero Base?
user avatar
castnplay - 14 May 20 18:56
Feel free to create your own :)
Heroes vol.1 Collection Showcase!
Heroes vol.1 Collection Showcase!more_vert
2020-05-05T12:01:02+00:00
Post file flag
Heroes vol.1 Collection Showcase! 2020-05-05T12:01:02+00:00close

Heroes are now available for download in the archive as well as the pre-supported versions!

Here's a quick showcase of the complete collection.

Thank you all for the support, let us know what you think.

*Download links are in the About Section

Cheers!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Heroes Vol. 1 Collection (May 2020) - 3D Printable Heroes by Cast n Play

Description
To support us and download this collection, go to: www.patreon.com/castnplay This is the full release of May 2020: Heroes Vol. 1. These models are available through all of May on Patreon.

URL
https://www.youtube.com/watch?v=2YTZpL7PPSA

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/2YTZpL7PPSA"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (33)
user avatar
User #28765208 - 5 May 20 12:35
Disappointed with this month release. You're far better than that and this could be made more effective on Heroforge. Thank you for free bandits - it saves the month.
user avatar
User #7701294 - 5 May 20 12:33
Dissaponied. Not holding up value/creative wise compared to the competition. Will re-evaluate after the tabaxi. This months seems way off compared to the earlier releases.
user avatar
User #3488338 - 5 May 20 13:30
I voted for this set and feel the same way, I’m feeling it’s create a model. Turn the head 10° to the left and release it as a completely different model, repeat for a huge looking release
user avatar
User #30745201 - 5 May 20 18:49
Not really excited about this month release too, but well majority of us voted for it so might as well enjoy it. And luckily the bandits set saved it. But actually, when i voted for heroes set,I thought we will get more than 9 character or at least more poses. I guess providing various modular pieces will add more value to this kind of set/releases, and people could put the modular pieces themselves as the character levels up (with some manual of course). Modular pieces could also make things looks different especially if you provide more head, like various races head so we could just attach different races head on the the humanoid body (human head on the monk, orc head on the paladin etc), different character head for each class, or maybe helmeted or masked nameless character head to make some grunts. (i will stop now before it gets crazier lol) However i am curious, the name of this set is Heroes volume 1, so is there any other volume this month or is it just that you will make next volume in the future?
user avatar
User #25321123 - 5 May 20 17:10
I think this one is great! the idea of character evolution is very interesting! the only thing that I don't understand is why the base sizes are different throughout.
user avatar
User #21742478 - 6 May 20 15:01
Love the idea of the character changing as they level up!
user avatar
User #19610091 - 12 May 20 00:44
Anyway, Are they 28mm or 32mm scale minis?
user avatar
castnplay - 12 May 20 22:40
32 mm :)
user avatar
User #11461913 - 9 May 20 15:28
I guess I was expecting more heroes and not just a bunch of alternate slightly tweaked models.
user avatar
User #28997227 - 7 May 20 18:19
Damn I really don't see why everyone is SO bummed about this month's release? Yeah its a hand full of figures in two different poses and three different (!) levels. I see how awesome the idea was from the get go. Imagine playing and you finally reach a time in the game and its time to upgrade to the next model? Like that seems like a fun aspect that people aren't taking into account. That's seriously dope. Instead of just playing with the same model till your character dies, you get to see them grow! IRL! Just because this set wasn't over flowing with stuff like past months I get the outcry, but damn it takes a lot to create Player Characters. Its not like oh I'll create a Axe Bandit and a Crossbow Bandit...oh and a Band Leader! The artist has to deicde how can I make this noticeably a Player Character but make it generic enough so anyone will be able to print it and use it. I love this release and I see so much value in it and appreciate the work put into it. Top notch as always.
user avatar
User #31170322 - 7 May 20 22:46
I haven't even bothered to down load it yet. The Weapon Shop is about the only thing here that interests me. Generally if I want a mini to represent a new character I make it on Desktop Hero 3D or Hero Forge or buy one of the thousands already out there. None of these even spoke to me. Its just a really well done but blah set.
user avatar
castnplay - 8 May 20 04:52
Thanks for the kind words, Mark. Really appreciated :)
user avatar
User #32729578 - 9 May 20 02:57
I am a painter and do not use mini's for gaming (although it is something, I have thought about getting into). My expectations are high for all am subscribed to on Patreon.com, and my expectations are creativity, craftsmanship, and value. This is exactly I get and have gotten here. Hopefully, the creators here will not be disheartened as the work is exceptional (something I cannot do). Cast n’ Play, please carry on.
user avatar
User #26510943 - 5 May 20 16:58
Hello, the worst happened to me, an external hard disk burned where I had all the Stl. files. Is there any possibility that you can send me links to download them again? T_T Thanks. I lost all the months that I was patreon.
user avatar
castnplay - 5 May 20 20:00
I'll send you a DM with instructions in a sec, Leonel
user avatar
User #28438360 - 5 May 20 16:18
I think the concept here is good. Your character changes as it levels up. Changes in poses would have made a big difference in how they were received.
user avatar
User #4259286 - 5 May 20 14:24
Honestly, heroes are the thing I look forward to most from the patreons I back, or rank and file monsters like more goblins / etc because I love variety in those and they get used the most. I dislike most of the options in heroforge and prefer compositions with an artist's touch. ( Heroforge weapons are too big / thick, hair options are absolute garbage, etc ). So I'm really excited to get more variety in my hero models... That said I do agree that the value felt off this month. It feels a little like we got 6 minis with some very subtle/slight variations available. I'd love to see more heroes, villians, or rank and file monsters down the line but maybe with some better modular options (heads, greater variety of weapons, etc), more varying poses, and really just more minis total.
user avatar
User #3263522 - 5 May 20 13:35
This is why I didn't vote for Heroes. As the other comments have said this is a disappointing release so far and not up to the standards of the previous ones. Once we get through this month hopefully we'll be back to the quality we've come to expect.
user avatar
User #18328725 - 5 May 20 13:57
Agreed! I found this monthy realease a little bit shallow! 3 versions of the same models with a couple of extra equipments. I would say that The Throwback Folder save the day here for new patrons as me, otherwise it would be a disaster!
user avatar
User #23825809 - 16 May 20 00:48
I cant find the download link for may collection in the about section. link please?
user avatar
castnplay - 17 May 20 04:46
https://www.patreon.com/posts/25749113 https://www.patreon.com/posts/36053793
user avatar
User #17119270 - 12 May 20 13:12
Completely underwhelmed by this release. Your price is significantly higher than other creators yet this release is really weak. I've been a supporter for a quite a long time and this is the first release that has made me question my patronage. Hoping that next month is more interesting.
user avatar
User #28661329 - 5 May 20 12:10
Just a question:beign all the "tall" models females (excluding the dwarf lady) , and all the "small" models males, in the series 2 soul we expect a "swap"? Tall males and small females? Great models anyway! 😀😁
user avatar
User #30825023 - 5 May 20 12:39
The pre-supported files aren't in the folder.
user avatar
User #14841184 - 5 May 20 13:08
They're in the pre-supported archive.
user avatar
User #30825023 - 5 May 20 13:12
The pre-supported Archive for Throwback has nothing in it, and the May release has a folder saying the files are incomplete and none of the individual folders have pre-supported files in them. Maybe I'm an idiot, but that's what I see...
user avatar
castnplay - 5 May 20 15:06
Files are in there. Inside each 'STL' folder
user avatar
User #30825023 - 5 May 20 15:09
Got it, whoops... Thanks.
user avatar
castnplay - 5 May 20 15:05
Thank you all for the feedback!
user avatar
User #28765208 - 5 May 20 18:37
No offence guys. Models are obviously beautiful as always and you just followed the votes but maybe next time avoid this type of sets ;)
user avatar
castnplay - 6 May 20 00:11
Non taken! It was a tough collection to plan and design since there were a lot of mixed opinions. In the end we tried our best and did what we thought would work. We're studying this right now to be able to avoid similar situations in the future and make sure we keep growing as artists. Cheers!
user avatar
User #3263522 - 20 May 20 18:27
A compilation of the comments and a new one of my own. The 'leveling up' aspect is good and has been done before. But using the same pose for all of them was .. less than optimal. Perhaps in the future you change the pose for each type so that there's differences to be seen. The thing that might have really saved this was mounted options. I know that in my games the characters ride horses and while there are horse bases they're not the same as a mini that's on a mount. Including the same three level aspect for horses and making mounted versions of the heroes would have sent this through the roof.
user avatar
castnplay - 21 May 20 04:16
Thanks for the great feedback!
Pre-Supporting Next Month's Models
Pre-Supporting Next Month's Modelsmore_vert
2020-04-26T01:04:41+00:00
Post file flag
Pre-Supporting Next Month's Models 2020-04-26T01:04:41+00:00close

Hey guys, join Yeesik while he's working on next month's collection. Feel free to ask questions about supports and printer settings, he's amazing at helping get printers dialed in and getting the best possible minis out of them.

You will also be able to see some of the upcoming models. *wink*


Side Note:

We uploaded to our Gumroad the sample pre-supported models for FREE. I know a lot of you have them already but feel free to share those around with anyone who might like 'em.

www.gumroad.com/castnplay

There are lots of Free models there, so feel free to download and share those as well.

Thank you for reading and have a great weekend!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Supporting Models Live Adventurers, Vampires and Giants

Description

URL
https://www.youtube.com/watch?v=NxOOG-iyqJg&feature=youtu.be

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/NxOOG-iyqJg"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (1)
user avatar
User #2345733 - 26 Apr 20 01:51
🕶 indoors... kewl beanz bruh😎
Heroes vol.1 Collection Sneak Peek!
Heroes vol.1 Collection Sneak Peek!more_vert
2020-04-25T17:37:39+00:00
Post file flag
Heroes vol.1 Collection Sneak Peek! 2020-04-25T17:37:39+00:00close

Finally, Heroes vol. 1 coming very soon!

There's going to be all kinds of Heroes (races and classes), along with bases, and a weapons merchant to be able to Gear up before the adventure!

Please, go download all the current collection right now! Kobolds and Shadows Reborn models are all in the Archive, and they will no longer be available starting next month, once the Heroes Collection is out.

We are already working on the Pre-Supported Models for the Heroes Collection. We will release those pre-supported and tested models a bit after the main release.

Here's a sneak peek from the upcoming collection, I hope you like them!

Comments (37)
user avatar
User #26749016 - 25 Apr 20 19:27
why are they all female?
user avatar
castnplay - 25 Apr 20 19:47
They're not all female. We're making more female because it's been highly requested.
user avatar
User #30895276 - 26 Apr 20 07:27
Female miniatures that are WELL CRAFTED and have actual character rather than just showing a lot of skin/ass/and long legs are hard to come by, especially ones this detailed. I’m P U M P E D
user avatar
User #31266800 - 25 Apr 20 18:01
The model with the tail makes me hope for a Dragonborn but it'll probably just be a kitty...
user avatar
User #12008876 - 26 Apr 20 11:53
Not that excited. We have Hero Forge to make custom, personalized hero miniatures. At least to me, that would be way better way to get a mini for my character. Might skip this month, sorry.
user avatar
User #9132167 - 26 Apr 20 20:42
Respect what you're saying. I guess i look at it this way. You can pop $6 per mini with them, or you can pop $10 or $15 or whatever the patreon fee here is, get a bunch of different minis .. unless you're literally going to play one character for the rest of your entire life?
user avatar
User #12008876 - 26 Apr 20 22:49
Yeah, I get that, but it's not that often I start to play a new character, and when I do, I would rather get a model from hero forge that's sculpted after what I had in mind for the character, and not limit myself to a pre-made more "generic" models (generic in a sense that custom tailored to my exact need). Besides, I mostly DM, so my need for minis are mostly enemies, creatures, NPCs and whatnot :) Get me right, I really enjoy Cast N Play, this month's kobolds were amazing :)
user avatar
User #31547219 - 25 Apr 20 19:23
I like that they are female but I wish there were some Dragonborn characters
user avatar
castnplay - 25 Apr 20 19:48
Yup, there are :)
user avatar
User #25110246 - 25 Apr 20 18:43
Dont like so much that they are almost all female characters
user avatar
castnplay - 25 Apr 20 19:48
We're making more females because it's been highly requested. The idea is to eventually have every combination in male and female.
user avatar
User #25110246 - 25 Apr 20 20:33
Its awesome have more female models but hope theres some male humana in the final release 😭... By the way, how do west access to the epic dragon? I didnt recive a link o cant find where to download
user avatar
User #19919702 - 26 Apr 20 05:28
As a female... I agree. The 3D miniature market is super saturated with female minis and im a little disappointed. I never thought Id have such a hard time finding a male elf paladin model or a male warrior model that wasn't a smaller humanoid that i could at least try to pass off as one
user avatar
castnplay - 26 Apr 20 15:35
Could this one work for you, @Kelsii? https://www.myminifactory.com/object/3d-print-elvish-campion-108743
user avatar
User #30891598 - 25 Apr 20 19:55
Are there duplicates on purpose?
user avatar
User #2345733 - 25 Apr 20 21:31
Different poses for the same model is very common for Patreon, its not really possible to make all unique models for the number they release each month. It used to bother me, but i realized I was getting more opportunities to like a model based on its pose than if they only released the one pose and often find only one pose i like out of the batch.
user avatar
castnplay - 25 Apr 20 21:33
Every hero will come in 2 poses. Regular and fighting stance.
user avatar
User #30891598 - 25 Apr 20 22:21
Got it! Some of the differences are subtle so I didn't notice when I quickly scanned thru. Very cool!
user avatar
User #28570257 - 25 Apr 20 19:45
Am I the only one excited about the building?
user avatar
User #4258169 - 26 Apr 20 07:21
That building has me very excited. Soon we'll have enough buildings to make a fantastic city.
user avatar
User #15702852 - 25 Apr 20 17:46
Will the kobolds and shadows reborn be available in MMF at the end of the month?
user avatar
castnplay - 25 Apr 20 17:48
Shadows Reborn is already there. Kobolds will be next month, yes :)
user avatar
User #29519738 - 25 Apr 20 18:07
Looks good so far, I bet there will be some surprises when the whole pack is released
user avatar
User #3766869 - 25 Apr 20 17:43
2nd column, 4th down... I like it, and I guess she's some sort of Storm sorcerer... but, it also kind of looks like she's blasting off using a super powerful fart.
user avatar
User #4258169 - 25 Apr 20 23:12
I'm just amused it looks like all the models shown so far have a version where they're barefoot... except the halfling.
user avatar
User #11461913 - 25 Apr 20 19:56
What’s disappointing is my other patreon is getting rid of their pre supported tier and giving supported models for free starting next month. I am looking to slim my patreon number and getting free supported models is a big plus. We’ll see what the future holds I guess.
user avatar
User #22099259 - 26 Apr 20 01:26
What's the other Patreon? I agree that adding free supports is a good incentive, but I find that some Patreon mini-makers focus on SLA and don't provide quality support for FDM/Ender 3.
user avatar
User #11461913 - 26 Apr 20 01:31
Both Artisan Guild (going free supports as of May) and Titan Forge give supported models. I dunno how they work on FDM. I have a Photon.
user avatar
User #31170322 - 25 Apr 20 22:30
Pretty underwhelmed by this choice in the poll. Minis are fine but I can literally get adventurers anywhere. Not real happy with next months poll either, could care less about Tabaxi and Dragon related stuff is as common as adventurers and idk, dungeons? We could have had some kick ass mind filters or even some Sladd, things that are harder to come by. I think the artist is great it the rest of you patreons that I'm eye balling. I'll give it till June and if that isn't a good selection I'll head on down the dusty trail where my money gets me something unique or at least interesting.
user avatar
User #31294802 - 26 Apr 20 02:33
I'm out.... I joined because I liked the style of the minis but honestly other patreons offer way more unique stuff for a lower price.
user avatar
User #16076338 - 25 Apr 20 17:45
I'm liking it!
user avatar
User #26843765 - 25 Apr 20 18:04
Are they all female except for the gnomes and halfling?
user avatar
User #30229272 - 25 Apr 20 22:00
I think this is going to be one of the greatest releases so far. Such a cool variety of figures! Can’t wait to see the full release!
user avatar
User #22362541 - 25 Apr 20 21:46
This month is not for me I think.
user avatar
User #31693457 - 25 Apr 20 18:45
Just checking, the "Shadows Reborn" you mention, are those the items in the Throwback folder? Just wanted to make sure I'm not missing any of the amazing sculpts!!
user avatar
castnplay - 25 Apr 20 18:51
There’s a folder called shadows reborn, look inside the new releases folder The throwback folder is not it.
user avatar
User #28765208 - 25 Apr 20 17:42
Misa no like it... but I like bases :-) Do we have tavern where every good journey starts?
RPG Sounds Campaign Funded & Pledge Manager
RPG Sounds Campaign Funded & Pledge Managermore_vert
2020-04-24T11:06:26+00:00
Post file flag
RPG Sounds Campaign Funded & Pledge Manager 2020-04-24T11:06:26+00:00close

Hello guys,

Sorry for the wait, I know a lot of you have been asking about Late Pledges and redeeming digital rewards from the RPG Sounds Kickstarter.

We've been making sure everything's working a good to go.The Pledge Manager is now live, you can upgrade your pledge, purchase add-ons and/or submit Late Pledges.

It will also let you redeem your digital rewards (Except for RPG Sounds, obviously). STLs, Cards, Map, and Items can be downloaded and printed now.We're using My Mini Factory's Pledge Manager services, so please create a My Mini Factory Account if you don't have one yet, to be able to redeem your digital rewards.

https://www.myminifactory.com/campaigns/rpg-sounds-14

As for RPG Sounds, I've been working hard to finish the re-design of some parts of it as well as adding the features unlocked by stretch goals.The development has begun and we're building RPG Sounds and the Marketplace at the same time to make sure everything is connected properly and seamlessly.

I've been also working on Marketplace design so that the experience between RPG Sounds and the Marketplace is excellent. I'm very happy with the progress we're making.Here's a Mockup of the updated RPG Sounds UI we're Implementing. (Of course, you'll be able to tweak UI Colors to suit your game and personality)

Sound design is also coming along nicely, we already have 4 musical cues finished and the Sound Designers are recording tons of sounds to create all the packs that'll come with the software. Here's a picture of them getting their hands dirty.


That's all, for now, regarding RPG Sounds. Thank you all for reading and for your patience with the Pledge Manager.

Thanks to everyone who supported the campaign.

We are working hard on RPG Sounds now. We'll keep you posted about development updates like this on Kickstarter.

https://www.kickstarter.com/projects/castnplay/rpg-sounds-0

Have a great day!



Comments (3)
user avatar
User #28673564 - 24 Apr 20 17:08
I am not familiar with pledge managers. How do I link this to my account?
user avatar
castnplay - 24 Apr 20 20:32
You got an email with a link. Follow that and it'll take you through all the steps to redeem your rewards :)
user avatar
User #9132167 - 26 Apr 20 20:43
Congrats. Have you printed the Stables FDM? Im doing it resin right now, 3 more parts to go.
Kobolds Pre-Supported Release 2020-04-16T06:24:35+00:00

Hello guys,

Thank you all for being so patient. We finally finished pre-supporting and printing all the Kobolds files. Most of them have been printed twice, some of the easier once only once and some tricky models even three times without errors using different printers and resins.

Kobolds are super small compared to a human, so please be super careful when de-supporting them since some supports are thicker than their wrists and it's easy to snap them off.

Tweezers and warm water are super helpful when de-supporting these bad boys.

I don't have much more to say right now, just pretty excited about releasing this and how well these models printed. Mario and Joseph have done a phenomenal job with these models, you can thank both those guys for all the hard work. I think you will enjoy them very much.

If you need any help printing or dialing in your printer, either DLP or FDM don't forget you can hop into our Discord server and ask any questions in the #3D Printing Support text channel.

The download link is in the previous post.

flag
Comments (20)
user avatar
User #20631374 - 16 Apr 20 19:03
Are the STLs for FDM, or are these all for resin?
user avatar
castnplay - 16 Apr 20 19:21
These were mind for resin. But we have seen people on discord print them on Fdm as well. Would not recommend 100% because of the size of them. But I guess it can be done
user avatar
User #24987663 - 16 Apr 20 18:12
I've noticed that the presupported files are full kobolds rather than the modular pieces, is this on purpose?
user avatar
castnplay - 16 Apr 20 18:59
Hi Stu, it is on purpose. The reason is that after several tests, printing such small pieces was nearly impossible to de-support without breaking them. For these ones we decided to support the complete ones because of that reason. But we'll be supporting modular options for bigger models. Also, we've decided to add an extra this month we will be supporting the Throwback folder as well + Undead Drake (FMD and DLP)
user avatar
User #26455815 - 16 Apr 20 13:22
These look amazing! (as usual) What program do you use to get those supports? They don't look like Cura or Meshmixer...
user avatar
castnplay - 16 Apr 20 17:59
Chitubox :)
user avatar
User #33496585 - 20 Apr 20 17:43
gnoll leader
user avatar
User #28888892 - 17 Apr 20 23:12
Haven't had a miniature fail until last night and this is the first time I'm using pre supported models but I have a feeling my house was to cold last night. Everyone else is printing so i know its on my end.
user avatar
User #30782874 - 18 Apr 20 03:40
I put this cool heater in my epax. Just magnet it to the inner wall. It was always cold as I have a 4inch exhaust tube out the window. https://www.patreon.com/posts/diy-epax-x1-33257127
user avatar
User #28888892 - 18 Apr 20 07:11
I just printed again had 2 print just right other 4 failed.
user avatar
User #28888892 - 18 Apr 20 07:13
Kinda funny cause the supports where all printed but not mini connected to them.
user avatar
User #294828 - 20 Apr 20 00:37
Add two seconds exposure and try again, failure at point of contact is usually caused by underexposure or bad resin properties, both can be solved by adding a bit of exposure. If that doesn't work decrease your lift speed by 25%.
user avatar
User #9132167 - 17 Apr 20 19:52
They came out so nicely. I printed 3 last night before bed and even without being careful they look great. Will clean and share on discord later this weekend
user avatar
castnplay - 17 Apr 20 21:45
Thanks for letting us know, Matthew! I'm so glad you had a good experience with them.
user avatar
User #797096 - 23 Apr 20 18:00
I had Kigrux C2 shield fail and Bruldob A lose his right leg, the other 4 I printed on the same plate were fine.
user avatar
User #294828 - 23 Apr 20 19:58
Hi, could you by any chance hit me up on the discord 3d printing support channel. I'd love to help but it requires a bit more direction than can easily be given in a comment section. Feel free to at me there @yessik.
user avatar
User #33170921 - 23 Apr 20 18:28
mhhm... it´s the first time I am printing pre-supported miniatures (not just from cast n play, but in general) - normally I put the supports there by myself (and never have problems) I didnt have any problems with missing legs or anything, which is great BUT... the huge amount of supports makes it super difficult for me to remove them properly afterwards (printed at 100%) Are all the supports really necessary?
user avatar
User #294828 - 23 Apr 20 19:10
Every support supports an island at .02 layer height. So yeah, they're all necessary unless you want damage to the FEP or to be constantly cleaning your resin. Have you tried a hot water bath after the IPA bath to weaken the supports?
user avatar
User #33170921 - 25 Apr 20 01:00
(I think my first reply didn't send, hope I don't reply twice now)... Thanks a lot for your advice, I really appreciate it. The hot water works wonders =)
user avatar
User #9132167 - 17 Apr 20 21:46
I’ll be honest - I can’t wait for him do you more of your stuff. I want to print everything from April
Kobolds Collection Showcase
Kobolds Collection Showcasemore_vert
2020-04-02T23:22:02+00:00
Post file flag
Kobolds Collection Showcase 2020-04-02T23:22:02+00:00close

Kobolds are now available for download in the archive! And here's a quick showcase of the complete collection.

Thank you all for the support and for being part of this!

Enjoy!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Kobolds Collection (April 2020)

Description
www.patreon.com/castnplay This is the full release of April 2020: Demon Hunters. These models are available through all of April in Patreon. To support us and stay on top of our new releases, go to our Patreon page.

URL
https://www.youtube.com/watch?v=yUGUHXdzlwA&feature=youtu.be

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/yUGUHXdzlwA"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (6)
user avatar
User #13322460 - 3 Apr 20 11:04
I always love your work, and these are very nice, but as Kobolds, for ME personally, they don't work. Kobolds are supposed to be tiny subteranean creatures that dig tunnels. Very basic clothing and weapons. Not warriors with armor, or the intelligence to be magic users etc.
user avatar
User #28373777 - 3 Apr 20 11:53
Volo's Guide to Monsters makes this a playable race in D&D so having these as warriors makes perfect sense. It also is something that other people are not doing.
user avatar
User #28373777 - 3 Apr 20 11:54
Thank you for these. It has been very hard to find good playable models of these for PC's. Great work.
user avatar
User #860642 - 3 Apr 20 18:06
Maybe my favorite set yall have done
user avatar
castnplay - 3 Apr 20 18:11
Glad you like it, Ted! :D
user avatar
User #31693457 - 3 Apr 20 20:56
Joined because of the amazing work on the kobolds! Really beautiful stuff. Secretly hoping you're considering building a Lich Army of undead, cause eventually my players are going to have to go on a lich murdering spree, and I think your take on that would be amazing. So glad your creativity is out there!
Kobolds Teaser!
Kobolds Teaser!more_vert
2020-03-24T16:56:57+00:00
Post file flag
Kobolds Teaser! 2020-03-24T16:56:57+00:00close

Finally, Kobolds coming next week!

There's going to be all kinds of Kobolds, along with bases, banners, and weapons to be able to plan the perfect encounter in the Kobold's Hideout.

Please, go download all the current collection right now! Demon Hunters models are all in the Archive, and they will no longer be available starting next month, once the Kobolds are out.

Here's a sneak peek from the upcoming collection (these are not all the models, there's even more coming!).

-

Also, RPG Sounds Kickstarter is doing great! But there's still time left to the campaign. You can learn more about it here:

https://www.kickstarter.com/projects/castnplay/rpg-sounds-0

There are lots of awesome rewards and unlocked stretch goals!

Stay well and healthy, friends!


Media (2)


Kobolds_Teaser.png (7.3MiB)
Kobolds_Teaser.png (7.3MiB)

Comments (33)
user avatar
User #8696812 - 25 Mar 20 00:48
Sounds like it's time to go out and buy a copy of Kobolds Ate My Baby...
user avatar
castnplay - 25 Mar 20 15:39
Oh, I didn't know that one! Will have to check it out
user avatar
User #2779085 - 25 Mar 20 20:08
But where are the candles???
user avatar
User #31170322 - 25 Mar 20 15:25
Amazing! My DM just asked me to print him some kobolds not 2 weeks ago and frankly the ones on Thingiverse are pretty lack luster. Excellent timing! I can't wait to start printing these guys.
user avatar
castnplay - 25 Mar 20 15:38
Yes! Excited to hear that :D
user avatar
User #28765208 - 24 Mar 20 17:07
Cool but I already can imagine a "toothless tribe"...
user avatar
User #31505826 - 1 Apr 20 14:09
I'm new here and just joined in March, when do the new months models typically become available?
user avatar
castnplay - 1 Apr 20 16:21
Releasing today! :D
user avatar
User #28469232 - 24 Mar 20 18:26
Wow, consider me hyped!
user avatar
castnplay - 25 Mar 20 15:40
:D
user avatar
User #10524852 - 24 Mar 20 17:32
I'm a little disappointed. These just look like shrunk down Dragonborn without any of the characteristics of Kobolds... Trap-making, cowardice & dirty tactics. That's just my opinion though. You guys still do great work and I can't expect to LOVE every single batch you guys make (which I have so far!) so keep up the great work!
user avatar
castnplay - 25 Mar 20 15:41
Thank you for the great feedback, Cedar!
user avatar
User #27545576 - 25 Mar 20 20:51
Maybe all that’s missing is a few extra weapons. Trappings, slingshots, picks, shovels, other mining tools.
user avatar
User #281907 - 24 Mar 20 17:17
Yesss! Been looking for some awesome Kobolds and this is perfect timing!
user avatar
User #21346813 - 24 Mar 20 21:49
I have as well. Very much looking forward to this release.
user avatar
castnplay - 25 Mar 20 15:41
Thanks guys!
user avatar
User #3804340 - 25 Mar 20 00:40
Cheers guys awesome work am hanging for the full release 👍😁👍
user avatar
castnplay - 25 Mar 20 15:39
Thanks for the support!
user avatar
User #19830611 - 24 Mar 20 22:22
Oh gorgeous! Fantastic as always.
user avatar
castnplay - 25 Mar 20 15:39
Glad you like 'em, Donna!
user avatar
User #923026 - 28 Mar 20 07:36
Hi! I will be joining the Hero Tier next month and absolutely love the upcoming Kobold models! I was just wondering if you would consider offering the models pre-supported? (either as part of the Hero tier or in a slightly higher tier level). Quite a few of the creators that I support on patreon are beginning to offer it and would be super helpful if you guys offer something similar. cheers :)
user avatar
castnplay - 29 Mar 20 19:08
We are working on it, yes. Trying to integrate that pre-supporting step into our workflow right now. I can't really say we'll have the Kobold collection ready and pre-supported. It'll most likely be the Adventurers collection in May.
user avatar
User #6147918 - 1 Apr 20 23:25
for just resin? or fnm as well?
user avatar
castnplay - 2 Apr 20 03:20
Initially resin. Looking at FDM after that. It's not our area of expertise, so we need to take baby steps to make sure we're doing it right.
user avatar
User #28617948 - 24 Mar 20 17:34
I dont know, but for me they looks more like lizardman than kobolds. But I have the Irish green small guys on my brain, so, suprise me, let the minis look awesome, and im be happy.
user avatar
castnplay - 25 Mar 20 15:40
Thanks for the feedback, Sascha!
user avatar
User #28939139 - 27 Mar 20 20:30
Wait, I thought kobolds were tiny lizardmen with somewhat draconic features?
user avatar
User #29433130 - 27 Mar 20 07:58
Wow these are great! So much character in each model.
user avatar
castnplay - 29 Mar 20 19:08
Thanks, Dan!
user avatar
User #6983775 - 24 Mar 20 17:14
I'm not normally a fan of kobolds, but you guys did a kickass job!! They look great!
user avatar
castnplay - 25 Mar 20 15:41
Thanks for the kind words!
user avatar
User #4856861 - 24 Mar 20 18:18
great preview and I think that I can increment the size they could be draconian too
user avatar
castnplay - 25 Mar 20 15:40
Thank you! And yes, of course you can.
We're teaming up with Arcane Minis! 2020-03-13T18:45:29+00:00

Hi guys!

As a lot of you know, Skies of Sordane is Arcane Minis' latest project. And it's now on its final days.

It features 5 Core Bundles with awesome 3D printable airships with playable interiors and miniatures with modular support.

On top of their great rewards, they will be adding Cast n Play's bases for their awesome minis.

Please, give that campaign a look. It's being run by amazing people and artists and it features insane rewards.


https://www.kickstarter.com/projects/skies-of-sordane/skies-of-sordane-3d-printable-stl-airships-and-miniatures?ref=9xua4v

flag
Comments (13)
user avatar
User #379185 - 13 Mar 20 20:29
Hmm neat. I was already backing this but nice to know I will get even more and from someone I already trust.
user avatar
User #28765208 - 13 Mar 20 18:49
Heh I'm here and there merchant tiiers :-)
user avatar
User #23854675 - 20 Mar 20 01:25
Awesome I backed that one!!
user avatar
User #8875407 - 13 Mar 20 18:53
I am a merchant for both CnP and Sordane! I'm so excited for this KS to wrapup!
user avatar
castnplay - 13 Mar 20 19:29
Awesome!
user avatar
User #27824874 - 16 Mar 20 17:38
Excited to see this CnP. You guys are for sure one of my favorites and I love to see collaborations which are now involving two of my favorite Patreons as well as this awesome Kickstarter.
user avatar
castnplay - 16 Mar 20 19:05
Thanks for the kind words, furballx!
user avatar
User #16343262 - 13 Mar 20 18:51
Backed day 1. With your extraordinary bases its even better. The KS is REALLY worth the money.
user avatar
castnplay - 13 Mar 20 19:28
Agree 100%
user avatar
User #12665391 - 13 Mar 20 18:51
Been all over this since day 1
user avatar
User #31240588 - 14 Mar 20 00:45
I love the minis, but the merchant tier is a bit too expensive for me at the moment. will it be available later or will I be able to upgrade to a merchant tier later on though?
user avatar
User #4828295 - 14 Mar 20 01:48
Hi Sirius. You mean on our Kickstarter? The merchant tier will always be available later! You will need to have The Armada in order to join the merchant program. If you want more information message my on Kickstarter :)
user avatar
User #31240588 - 17 Mar 20 11:37
for some reason i can't send a message in kickstarter. I'm curious about "the merchant tier will always be available later". Where will the commercial license be available at? Will this also hold true to the add-on contents? Currently I'm thinking of getting all the 80 CAD pledge and the add-ons, but get the merchant tier later on. thanks
RPG Sounds Campaign is live!
RPG Sounds Campaign is live!more_vert
2020-03-10T14:12:39+00:00
Post file flag
RPG Sounds Campaign is live! 2020-03-10T14:12:39+00:00close

https://www.kickstarter.com/projects/castnplay/rpg-sounds-0?ref=user_menu

RPG Sounds is a friendly (and epic) audio software for Dungeon Masters. Users can easily set the mood of the session by adjusting Music, Soundscapes and triggering Sound Effects to greatly enhance their game sessions. RPG Sounds boosts your immersion and grants the best auditive.

Audio Demo:

https://soundcloud.com/cast-n-play


Help us bring RPG Sounds to life!

By supporting and/or sharing with family and friends you will be helping us out greatly!


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Bob, The Young Dungeon Master

Description
https://www.kickstarter.com/projects/castnplay/rpg-sounds-0/comments Help us bring RPG Sounds to life by supporting the Kickstarter campaign!

URL
https://youtu.be/vQiWC3f5ipg

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/vQiWC3f5ipg"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (2)
user avatar
User #13590588 - 11 Mar 20 10:36
Are any of the Kickstarter stl files exclusive to the campaign? It seems like most were Patreon releases initially
user avatar
castnplay - 11 Mar 20 14:49
Yes, most of them were from Patreon initially. There's a bard and the tokens that are exclusive. As well as the item deck, map tiles and items for the map. Cheers! :)
Epic Rewards!
Epic Rewards! more_vert
2020-03-09T21:13:16+00:00
Post file flag
Epic Rewards! 2020-03-09T21:13:16+00:00close

We want to thank you all for your support!

We're super excited about this and decided to announce it earlier than planned. We will be releasing Epic Rewards for our most loyal supporters.

By being a supporter for 3 months in a row, you'll earn a Loyalty Credit. These Loyalty Credits can be used to get any Epic Reward.

We will be releasing a new Epic Reward every 3 months. With The Undead Drake being the first one and coming on April 1st.

We've been working hard to bring you these new models and rewards, we hope you like it and are as excited about it as we are.


We're currently test printing this bad boy, we will be posting pictures as soon as it's ready (most likely early next week).

-----

SIDE NOTE ANNOUNCEMENT!

RPG Sounds will be releasing TOMORROW MARCH 10TH!

Please, go pre-register to the campaign to get notified once it goes live!

https://www.kickstarter.com/projects/castnplay/rpg-sounds-0

If you want to support but you're not that much into Sounds, there will be an exclusive pledge level of STL Rewards for you to be able to help us bring this to life! We will feature tons of models from past collections, as well as exclusive models and tokens!




Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Undead Drake, Epic Reward | April 2020

Description
www.patreon.com/castnplay We release one Epic Reward every 3 months. Start collecting them by being a supporter and unlocking Loyalty Credits. To download our free STLs, go to www.gumroad.com/castnplay

URL
https://youtu.be/xVM8b40RnEA

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/xVM8b40RnEA"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (42)
user avatar
User #27824874 - 9 Mar 20 21:18
😮
user avatar
User #17545754 - 9 Mar 20 21:50
Wow. Just WOW.
user avatar
User #11121156 - 9 Mar 20 21:59
Do we have a credit if we’ve been a member for 3 months or more now or do I have to wait until may for this bad boy
user avatar
castnplay - 9 Mar 20 22:39
February March and April Members will automatically unlock this on Launch :)
user avatar
User #3263522 - 16 Mar 20 15:06
So those of us who have been backers from the start don't get retroactive credits? It's a going-forward thing?
user avatar
User #30745201 - 10 Mar 20 05:53
So glad i'm joining since February. So does the system on patreon support this? I mean, any feature to monitor how long a patron subscribed?
user avatar
castnplay - 10 Mar 20 06:35
Absolutely :)
user avatar
User #14428283 - 3 Apr 20 18:38
I want to print this for my game
user avatar
castnplay - 3 Apr 20 18:39
It will be sent either today or tomorrow. We're waiting for Patreon to be done processing all payments to be able to send it to everyone :)
user avatar
User #10102033 - 10 Mar 20 00:20
Will pledging for past rewards in the KS count for months towards the Epic release?
user avatar
castnplay - 10 Mar 20 03:18
Not in the Kickstarter. It would be a pain to keep track of that D: Only Patreon for now. sorry
user avatar
User #14428283 - 3 Apr 20 18:38
I didn't get an email for this. Whernt we supper to get one on April 1st?
user avatar
User #23265352 - 9 Mar 20 21:21
Any chance this will have a supported option for those in that tier? This thing looks amazing and looks scary as hell to support! lol
user avatar
castnplay - 9 Mar 20 21:24
We're happy to share our files. The only problem is we're testing this on a Formlabs printer. We could share the PreForm Files without any trouble. Unfortunately, those are not compatible with other slicers/printers.
user avatar
User #2392258 - 9 Mar 20 23:38
I agree with Michael--a pre-supported version would save a ton a time. The epic model looks great but I'm sure would be an undertaking for us novices. What about STLs in separate pieces so that it could be scaled up more easily?
user avatar
User #2779085 - 9 Mar 20 21:15
That is stunning
user avatar
castnplay - 9 Mar 20 21:49
Thanks, Martin!
user avatar
User #10102033 - 10 Mar 20 17:50
Maybe add 1 token to a backer tier on KS
user avatar
User #13322460 - 9 Mar 20 21:21
WOW. That's dope as hell.
user avatar
castnplay - 9 Mar 20 21:24
Glad you like it, Wil!
user avatar
User #188507 - 9 Mar 20 22:02
I still dont understand why you mix .stl files and the sound software into one single kickstarter...
user avatar
castnplay - 9 Mar 20 23:40
Well, it’s just more rewards for backers. :)
user avatar
User #188507 - 10 Mar 20 06:05
yea, but only for thoose that own a 3d printer. I know tons of dungeon masters that are not into 3d printing but would also be interested in this kickstarter. For them, additional stls bring no value, but they would be happier with stretch goals that contribute to the actual product, like more music or sounds. Don't get me wrong, Im in to this Kickstarter anyway and love your minis, I just want to give feedback to help.
user avatar
castnplay - 10 Mar 20 06:32
That's the thing, it's not only STLs. It's also Map tiles, Cards, Tokens and of course, more music and sounds as stretch goals. We're adding more things to it, not compromising core rewards for extras :)
user avatar
User #20014988 - 10 Mar 20 14:10
so is this going to operate the same way as, lets say Artisan Guild, where everyone subbed for the prescribed 3 months (which they call "seasons") gets the free Epic Monster, or is each monster going to be worth X tokens so a person may have to forgo getting the epic monster in the hopes that a more expensive one they may want at a later date shows up? Im just unclear on how tokens will work pr be tracked.
user avatar
castnplay - 10 Mar 20 14:18
Epic Rewards will be 1 token. For continuing supporters it'll unlock all of them. But for new members, after 3 months, they'll have the chance to pick the whichever they like best.
user avatar
User #16175846 - 9 Mar 20 23:36
So, just so Im clearly understanding. There'll be only ONE release every three months and our one credit is used to redeem that one three monthly Epic stl; OR, There will be many Epic stls to choose from, like one each month or something, and we have to choose wisely which one we spend our credit on.
user avatar
User #16175846 - 9 Mar 20 23:36
P.S. AMAZING incentive and sick looking model to start with!
user avatar
castnplay - 9 Mar 20 23:42
There will be one release every 3 months (At least for now. Might be more frequent in the future). And People will get a credit every 3 months as well.
user avatar
User #18606713 - 9 Mar 20 21:17
Does the epic reward cost more than one credit?
user avatar
castnplay - 9 Mar 20 21:18
They will all be 1 credit. We just want to give you options when the Epic Reward’s Library starts building.
user avatar
User #7701294 - 10 Mar 20 07:51
Interesting, how and where will we see the tokens =)?
user avatar
castnplay - 11 Mar 20 01:49
Beginiing of every month (first week) Well send you a message :)
user avatar
User #3488338 - 9 Mar 20 23:33
As long as we are continued subscribers since feb will be have enough credits to get every epic reward? I’m a collection completionist
user avatar
castnplay - 9 Mar 20 23:39
That is correct :)
user avatar
User #3804340 - 10 Mar 20 04:00
Man this guy is Mega impressive!!! You guys are great to follow and haven’t missed the mark once Keep up the good work and I’m so hanging for RPG Sounds. Again great Work!!!
user avatar
castnplay - 10 Mar 20 06:36
Thanks for the kind words! :D
user avatar
User #21554911 - 9 Mar 20 21:52
So it's being released on April 1st... aka April Fool's Day. I really hope this isn't a prank as the model looks amazing.
user avatar
castnplay - 9 Mar 20 23:58
It’s not an April Fool’s joke. Or is it? D: Jk. It’s not
user avatar
User #4555429 - 15 Mar 20 21:24
Or is it?
user avatar
User #8875407 - 10 Mar 20 00:28
The epic rewards are an awesome idea! I'm PSYCHED to print that drake for my Dad. He'll love it. Also, those tokens you're teasing are pretty dope. My Dad and I have been really excited to back this project.
user avatar
castnplay - 10 Mar 20 03:17
So happy to read you like these! It's almost here :D
"Forest Creatures" Complete Collection Release!
"Forest Creatures" Complete Collection Release!more_vert
2020-02-14T21:46:13+00:00
Post file flag
"Forest Creatures" Complete Collection Release! 2020-02-14T21:46:13+00:00close

FULL COLLECTION: https://www.youtube.com/watch?v=Q7PjVPkJrH8

Happy Valentine's Day. Forest Creatures collection will hit the archive a day ahead of schedule!

This is it, the complete collection of the Forest Creatures collection is already in the archive waiting to be printed!

LINK TO THE ARCHIVE

Here's the list of the current archive:

152. Fairy King


153. Young Ents


154. Sprite


155. Verdant Sentinel


156. Creature Weapons


157. Forest Elves


158. Forest Warrior


159. Chaos Troll


160. Fairy House


161. Creature Bases


162. Forest Creature Shield


Comments (21)
user avatar
User #15327902 - 15 Feb 20 13:39
Loving it!
user avatar
castnplay - 16 Feb 20 02:50
Glad you do! :D
user avatar
User #30392654 - 15 Feb 20 05:13
Great release. Any chance female editions of the elves could pop up in the future?
user avatar
castnplay - 16 Feb 20 02:50
Probably not for this collection, since we're already working on the Demon Hunters to have that ready on time. But in the future that'd be something really cool to explore :D
user avatar
User #21174459 - 14 Feb 20 22:57
I'm loving the modular weapons and themed bases from the last sets. Beautiful, as always.
user avatar
castnplay - 16 Feb 20 02:51
Thanks for the kind words, Mauricio!
user avatar
User #3792817 - 14 Feb 20 21:51
Not seeing the new stuff in the folders
user avatar
User #11862270 - 14 Feb 20 21:56
Same here, only seeing up to 156 in there currently
user avatar
castnplay - 14 Feb 20 21:56
It's probably still updating. Give it a couple minutes. Should be there very soon
user avatar
User #3792817 - 14 Feb 20 21:54
157-162 are missing
user avatar
User #28511794 - 15 Feb 20 08:40
Thank you for the shield.
user avatar
castnplay - 16 Feb 20 02:50
You're very welcome!
user avatar
User #15919875 - 14 Feb 20 21:58
Also missing 157-162...
user avatar
castnplay - 14 Feb 20 22:04
Guys, try refreshing your dropbox. Should be all there
user avatar
User #19296850 - 16 Feb 20 17:52
is there any way you can make the prints modular it's impossible to remove supports for most of the models
user avatar
User #4810335 - 17 Feb 20 02:20
I agree with this. I really like a lot of the sculpt, but it's like no thought is given to how practical they are to print or game with.
user avatar
User #24339636 - 17 Feb 20 07:36
what kind of printer are you using, and what support settings? I have no issues with the supports on resin.
user avatar
User #19296850 - 17 Feb 20 20:40
Anycubic i3 Mega, it's not the supports that I have a problem with its the placement of the supports. For example, the young ents have a gap between the head and the bush on top and its physically impossible to remove the supports without snapping the model. They aren't the only model like that either, it's disappointing because I love the way theses models look but like Joren said it seems that there is no thought given to how these model will print out
user avatar
castnplay - 17 Feb 20 20:40
How are you supporting the files? We test print most of the models before release to make sure they print well.
user avatar
User #19296850 - 17 Feb 20 21:05
I use the Cura slicer
user avatar
User #19296850 - 17 Feb 20 21:11
I guess what I was hoping for is, something similar to how the Artisan Guild creates their models. If it's a larger or complex print they break it up into multiple small files so you can get the best quality without having to worry about removing difficult supports. not saying you guys don't do that just some of the models aren't like that and it's a big pain.
We just hit 1300, let's go! 2020-02-08T01:19:11+00:00

Thank you so so so so much, And welcome to all the new supporters!


As a thank you for supporting us and for reaching this goal, we just released 5 vehicles, they are all in the archive and ready to be printed right now!


ARCHIVE LINK


Just FYI... the poll for the upcoming collections will be posted next week, feel free to drop suggestions in the comments section.

Let’s keep the ball rolling! Our next stretch goal will add another mini to the Throwback Folder every month. What will come after that? Feel free to drop suggestions for that as well!

Back when we started this we never imagined we would get this kind of support. It is really an amazing experience.


On a side note...We heard all the feedback and are working on improving RPG Sounds. The rebooting of the Kickstarter campaign will be live soon! Please, go pre-register for that campaign with this link (it costs nothing, it's not early pledging):


https://www.kickstarter.com/projects/castnplay/rpg-sounds-0

There will be more, better and awesome rewards thanks to a great partnership with My Mini Factory. Expect more news about this project in the next weeks.


Thank you all for making this possible!




flag
Comments (13)
user avatar
User #13758577 - 8 Feb 20 01:20
Was it me? Was I no.1300? :)
user avatar
castnplay - 8 Feb 20 01:23
You are 1301, Tim. Hell, yeah! 1300 was SilverhawkPX45 (I wish I could tag him here!)
user avatar
User #13758577 - 8 Feb 20 01:25
Dang it! I wanted to be special. I was going to wait until the vehicles got released to sign up. but then I saw those awesome Fire Giants and couldn't wait! Great work :)
user avatar
castnplay - 8 Feb 20 01:26
Well, you're in luck, the vehicles are now up for grabs :D
user avatar
User #26676065 - 8 Feb 20 22:03
Congrats! For the next collection I would suggest dragons and other classic but rare D&D monster. Or maybe Mind Flayer and other Chutulu like monsters?
user avatar
User #25025991 - 8 Feb 20 03:31
Sci-fi fae would be awesome, but I doubt they'll appear in a poll any time soon xD
user avatar
castnplay - 10 Feb 20 18:09
Thanks for all the suggestions! We'll be posting a poll shortly :D
user avatar
User #17515580 - 9 Feb 20 14:41
I've really been looking for some Victorian era human minis in general. So, ladies/gentleman, police officers, postal workers, whalers, ferriers, etc
user avatar
User #18244975 - 8 Feb 20 01:35
More versus sets sound neat. Centaur vs Minotaur is one I've always thought would be cool. A lot of different Tabaxi would be an awesome release.
user avatar
User #30051313 - 8 Feb 20 01:20
Yasssss this is perfect timing!!!!! This Sunday my players are doing a monster truck rally in hell, sooooo
user avatar
castnplay - 8 Feb 20 01:21
That sounds FREAKING AWESOME
user avatar
User #16812179 - 8 Feb 20 06:23
Perhaps a collection of were-creatures: characters who turn into bats, rats, wolves, big cats. Or a Swamp environment - monsters and humans/humanoids that live in the mucky, spooky swamp.
user avatar
User #26960696 - 8 Feb 20 08:03
How about a fancy-schmancy palace or museum for tabletop players to infiltrate? Could be a fun opportunity to do some posh noble characters, masquerade attendees, house guards, etc. And all those valuable prop items to steal!
Demon Huntress - WIP (March's Collection)
Demon Huntress - WIP (March's Collection)more_vert
2020-02-05T03:55:30+00:00
Post file flag
Demon Huntress - WIP (March's Collection) 2020-02-05T03:55:30+00:00close

Work in progress...

Here's a sneak peek of the upcoming Demon huntress from March's collection, this will come in a couple poses with different head and weapon options.

Hope you like it!

https://www.youtube.com/watch?v=j8irhGa7wLM


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Demon Huntress - Work in Progress (March 2020 Collection)

Description
www.patreon.com/castnplay Work in progress... Here's a sneak peek of the upcoming Demon huntress from March's collection, this will come in a couple poses wi...

URL
https://www.youtube.com/watch?v=j8irhGa7wLM

HTMLplay_arrow

<iframe class="embedly-embed" src="//cdn.embedly.com/widgets/media.html?src=https%3A%2F%2Fwww.youtube.com%2Fembed%2Fj8irhGa7wLM%3Ffeature%3Doembed&display_name=YouTube&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Dj8irhGa7wLM&image=https%3A%2F%2Fi.ytimg.com%2Fvi%2Fj8irhGa7wLM%2Fhqdefault.jpg&key=8ee8a2e6a8cc47aab1a5ee67f9a178e0&type=text%2Fhtml&schema=youtube" width="854" height="480" scrolling="no" title="YouTube embed" frameborder="0" allow="autoplay; fullscreen" allowfullscreen="true"></iframe>
Comments (10)
user avatar
User #30051313 - 5 Feb 20 04:09
You make it look so easy, dang!
user avatar
User #3813072 - 5 Feb 20 03:59
Very cool
user avatar
User #14841184 - 6 Feb 20 09:26
That was fun to watch! I really wish I had the patience to learn how to sculpt. Looking forward to the release!
user avatar
User #25134117 - 5 Feb 20 17:00
I am excited for this one!
user avatar
User #987261 - 5 Feb 20 07:26
Can't wait!
user avatar
User #25110246 - 6 Feb 20 03:11
Awesome!!! We are gonna have a male hunter???
user avatar
castnplay - 6 Feb 20 17:46
Yeah, and different kinds and races !
user avatar
User #24602305 - 5 Feb 20 08:02
Looks great I'd love to see more videos like this from you.
user avatar
castnplay - 5 Feb 20 14:52
There’s more coming for sure
user avatar
User #19994472 - 5 Feb 20 04:16
impressive
"Forest Creatures" 1st Release is Here!
"Forest Creatures" 1st Release is Here!more_vert
2020-02-01T19:44:13+00:00
Post file flag
"Forest Creatures" 1st Release is Here! 2020-02-01T19:44:13+00:00close

Hiya!

The first release of the Forest Creatures collection is here!

Remember, this is only half of it.

LINK TO THE ARCHIVE

The next half will release on February 15th.

Here's the list of the actual archive:

152. Fairy King


153.Young Ents


154. Sprite


155. Verdant Sentinel


156. Creature Weapons


Please, keep the feedback coming, it helps us continue improving everyday. We're still working on the final details for the next release.

So, expect teasers in the following days. You can find all these models + the updated

Also, February's Throwback models are in the archive NOW!

https://www.youtube.com/watch?v=m6m8dWz4EwY

Have a nice weekend :D

Comments (14)
user avatar
User #23854675 - 3 Feb 20 19:18
Oberon and the trents are cool but that fairy warrior is show stealing good!
user avatar
User #29582117 - 6 Feb 20 01:44
Question.....what size do you print them to show the detail like it is? I did 6cm's. Lost a bit of detail.
user avatar
castnplay - 6 Feb 20 17:46
This are renders. We usually print them at 32mm. On the photon we don't lose as much detail as we do on the Ender 3
user avatar
User #25123537 - 14 Feb 20 05:56
I’m hoping for a male sprite as well on the second half. Just created a homebrew sprite race for my buddies campaign, so this is perfect (HMU if you want the DnDBeyond link)
user avatar
User #390306 - 1 Feb 20 19:49
Oh wow these look fantastic
user avatar
User #14600421 - 3 Feb 20 19:34
Absolutely adore everything about this except the sprite's antenna, both a pain to print and inevitably going to snap off. Any chance of a variation without those?
user avatar
User #4810335 - 4 Feb 20 18:32
I agree on the antenna. They're hard to print. Hard to not break during support removal/cleanup. Even if they survive all that, they'll never survive the table.
user avatar
castnplay - 4 Feb 20 23:27
Working on getting rid of the antennas. Please, re-download the files in a couple of hours. They should be updated by then
user avatar
User #14600421 - 8 Feb 20 17:59
Thank you!!!
user avatar
User #28511794 - 1 Feb 20 21:17
Shield option for elf?
user avatar
User #4555429 - 2 Feb 20 08:06
Yes, what about that? Did you want to ask them if they can make one?
user avatar
castnplay - 2 Feb 20 20:03
We didn't plan for a shield. But we'll try as hard as possible to squeeze it in for the next release if we have the time.
user avatar
User #6147918 - 2 Feb 20 05:10
gotta admit i was kinda ehhh on this one but now im really impressed. nice work
user avatar
User #19830611 - 5 Feb 20 17:40
I really like the sprites, and love those little antennae :)
"Forest Cratures" First Release Coming Soon
"Forest Cratures" First Release Coming Soonmore_vert
2020-01-30T19:25:47+00:00
Post file flag
"Forest Cratures" First Release Coming Soon 2020-01-30T19:25:47+00:00close

Hi Guys!

As you know, February's theme is going to be "Forest Creatures". Based on the poll and comments, we decided to make a mix of different characters and creatures, with terrain coming later on February.

We are so excited to share with you this showcase we've been working on of the upcoming collection, coming out 1st of February.

Here's the list of the first release:

152. Fairy King

153 Young Ents

154. Sprite

155. Verdant Sentinel

156. Creature Weapons

Also, we were working on modular hands (and heads coming soon) for some of the characters, for you to decide which one is most useful and fits your character best :D


Wait for more info about the second release of February's theme on the next days (Coming out on February 15th).

***IMPORTANT: Don't forget to download all "The Wizards Guild" collection before its no longer available (Last day in the archive January 31st). Don't miss out! Here's the link: ARCHIVE

You're awesome :D


Embed data

Provider
YouTube

Provider URL
YouTube

Subject
Forest Creatures (February 2020) - Cast n Play Release

Description
This is the first release of February's collection: Forest Creatures. This models will be available on February 1st. To support us and stay on top of our new releases, go to: www.patreon.com/castnplay Our catalog can be found at: www.gumroad.com/castnplay www.myminifactory.com/users/castnplay

URL
https://www.youtube.com/watch?v=m6m8dWz4EwY

HTMLplay_arrow

<iframe
    src="https://www.youtube.com/embed/m6m8dWz4EwY"
    class="embedly-embed"
    width="854"
    height="480"
    frameborder="0"
    scrolling="no"
    allowfullscreen
>
</iframe>
Comments (25)
user avatar
User #19994472 - 30 Jan 20 23:22
Also, it is really great to consider customisable weapons, bravo!
user avatar
User #28511794 - 30 Jan 20 19:54
Any chance for a shield?
user avatar
User #23265352 - 30 Jan 20 23:48
Yes please!
user avatar
User #23189704 - 1 Feb 20 06:24
Those weapons look amazing. Are they available without the hands attached to them?
user avatar
castnplay - 1 Feb 20 06:32
Yes, of course :)
user avatar
User #10376174 - 30 Jan 20 19:33
Wow these sculpts are phenomenal
user avatar
User #18054838 - 30 Jan 20 19:34
👍 👍
user avatar
User #13816345 - 31 Jan 20 09:41
AMAZING I hope there will be some Guards, that look like the king Female/Male with bows etc. or "Wild Hunt" themed.
user avatar
User #28756513 - 31 Jan 20 10:19
When I got it right, then these are all the miniatures we get. The second release in Feb 15 will be terrain and maybe woodland bases and something like that.
user avatar
User #8299780 - 31 Jan 20 17:21
Where can we find these models?! They are fantastic!
user avatar
castnplay - 31 Jan 20 17:26
They will be all in the archive tomorrow! :) Make sure you download the current ones, because they will be replaced.
user avatar
User #8299780 - 31 Jan 20 17:30
Thank you!
user avatar
User #285046 - 30 Jan 20 19:58
SO GREAT. Every month I re-evaluate which patreons I'm keeping up with and you make it easy to decide to stay on board.
user avatar
User #29519738 - 1 Feb 20 19:19
Sorry but I'm new to printing. Anyone have any tips on how to print the treants?
user avatar
castnplay - 2 Feb 20 20:03
You should head over Discord. There's a channel dedicated to printing help. I'm sure you'll find the answers you're looking for in there.,
user avatar
User #8374148 - 31 Jan 20 06:27
Is it possible to get the actual pictures of the upcoming sculpts instead of/in addition to the video? While the video format is cool.. it is nice to be able to zoom in on pictures and check out details, etc.
user avatar
castnplay - 31 Jan 20 17:26
Absolutely!
user avatar
User #29519738 - 2 Feb 20 20:29
Thanks
user avatar
User #4259286 - 31 Jan 20 21:24
I really think this is the best work yet. I love your work but rarely use the characters because I tend to like more realistic fantasy and less cartoony in my tabletop games (that wasn't meant to be insulting, you just have a style) but these work perfectly for me. By far my favorite yet.
user avatar
castnplay - 1 Feb 20 05:58
Thank you, Nick!
user avatar
User #29221038 - 1 Feb 20 05:04
I love these! Perfect for an upcoming hobby project of mine.
user avatar
User #766754 - 30 Jan 20 19:35
This look really cool, specifically like the trees I used the previous treant and my players loved it. Will there be pre supported versions for easier printing? Those bigger models can be a bit tricky
user avatar
User #19994472 - 30 Jan 20 23:01
Love them!!!!
user avatar
User #10848250 - 30 Jan 20 19:28
Ugh these are SO COOL.
user avatar
User #22419918 - 30 Jan 20 19:41
Very cool release! Would love to see some big ents suitable for Lord of the rings.
Diorama Contest Winners
Diorama Contest Winnersmore_vert
2020-01-26T15:00:07+00:00
Post file flag
Diorama Contest Winners 2020-01-26T15:00:07+00:00close

Thank you everyone for participating!

We really love seeing Cast n Play's miniatures painted so wonderfully. All your work is really awesome.

AND THE WINNERS ARE..... 🥁🥁🥁🥁🥁🥁


Comments (8)
user avatar
User #201645 - 27 Jan 20 13:20
They're all great work, though I think #3 is my favourite. Actually, I think #1 is too colourful to be a graveyard scene, so not as fond of it as the others. But, fortunately, my opinion isn't the one that counts. :)
user avatar
castnplay - 1 Feb 20 16:51
They're all amazing! It was a really tough decision.
user avatar
User #19998153 - 26 Jan 20 15:45
Wow! Awesome!!! Thank you guys so much :D I had so much fun working on this contest
user avatar
User #724448 - 27 Jan 20 01:54
Congratulations. Great work!
user avatar
User #22473309 - 26 Jan 20 15:24
"4rd 5rd" Great submissions however
user avatar
User #19166851 - 26 Jan 20 16:33
haha. Copy/paste/change 3 to 4/5
user avatar
User #22419918 - 26 Jan 20 18:14
Thank you very much! Didn't expect to win! There were some really good dio's around!
user avatar
User #27153388 - 26 Jan 20 15:49
Amazing work all around!
RPG Sounds Kickstarter is LIVE!
RPG Sounds Kickstarter is LIVE!more_vert
2020-01-21T18:58:01+00:00
Post file flag
RPG Sounds Kickstarter is LIVE! 2020-01-21T18:58:01+00:00close

https://www.kickstarter.com/projects/alexzaragoza/rpg-sounds

RPG Sounds is the ultimate sound app for Dungeon Masters. It's fun, easy to use and does a good job.

Please, go check out the project. We've put a lot of love and effort into this for the past half a year.

*There are bonus cool 3D Printables for everyone that supports starting at "A Bard's Life".

Even if you don't back, please help us spread the word. It would mean a lot if you did!


Media (1)


00o_Today.jpg (844.9KiB)

Comments (9)
user avatar
User #2492040 - 26 Jan 20 17:36
It says that this is canceled??
user avatar
castnplay - 26 Jan 20 23:29
It is paused for now. But everything's fine. We received so much feedback we want to take a step back, work a bit more on it an relaunch. Also, we partnered with My Mini Factory and will add printed minis to the pledge rewards, on top of the software. It's just going to make the campaign so much better and supporters will get a lot more value for their money :)
user avatar
castnplay - 26 Jan 20 23:34
Here's a link to the update post: https://www.kickstarter.com/projects/alexzaragoza/rpg-sounds/posts/2738657
user avatar
User #27824874 - 21 Jan 20 23:33
I’m in!
user avatar
castnplay - 22 Jan 20 01:51
Thank you!
user avatar
User #7669987 - 21 Jan 20 19:08
You mention in the description that it's an app. But can you please make it a lot more clear as to which platforms it will be available on? Windows, Android, IOS, OSX, Linux? I know IOS users would be bummed if it was Android only, and vice versa. Please, forgive me if the information is in there and I've overlooked it
user avatar
castnplay - 21 Jan 20 19:32
That’s a great question! The plan is to support Windows and Mac OS. iPad OS and Android Tablets are stretch goals right now.
user avatar
User #188507 - 21 Jan 20 19:49
backed it. I once had a free software doing this, but it did broke some while ago...
user avatar
castnplay - 22 Jan 20 01:51
Thanks for the support!
We hit 1200 Patrons! OMG OMG OMG
We hit 1200 Patrons! OMG OMG OMGmore_vert
2020-01-16T17:00:54+00:00
Post file flag
We hit 1200 Patrons! OMG OMG OMG 2020-01-16T17:00:54+00:00close

Welcome to all the new members! This is AMAZING. Thank you for the support :D

You have unlocked an extra model for the Throwback folder, now at the beginning of every month you will get 8 items in there from past collections!

We've been requested this one a couple of times, so here it goes. You will be able to find 'Temple Bases Pack' in the archive RIGHT NOW.


Our next goal will be unlocked at 1300 Patrons.

When we reach this goal. We will release a special vehicle pack to ALL OUR PATRONS. (5 vehicles)

We will also add 1 more mini to the Throwback Folder! (9 minis total each month)


Open vehicles come with and without a pilot!

Again, thank you all for joining and hope you're enjoying all the models :D

Cheers!


Media (1)


Vehicle_05_CastNplay.png (1.7MiB)

Comments (19)
user avatar
castnplay - 16 Jan 20 18:32
All of them!
user avatar
User #12276336 - 16 Jan 20 17:33
dooooood. this needs to happen before i get back home and start my descent into avernus campaign! stoked
user avatar
User #24681285 - 16 Jan 20 20:07
Thinking the exact same thing, we have session 0 next week :)
user avatar
User #24071970 - 27 Jan 20 07:31
I paid for (some of) these models via your other Patreon. Is there a way I could access these (like the Infernal Engine?) before the 1300 Patrons?
user avatar
castnplay - 27 Jan 20 14:21
The Infernal Engine was never released at The Parking Lot, so for that one specifically, not yet. The rest of them I can send them to you by email for sure. Cheers!
user avatar
User #27877382 - 17 Jan 20 05:07
Really happy to be a Patron! I'm curious about the themed bases, though... are sculpts such as the Wizard Hero supposed to go on a 50mm base? Seems like the 25mm bases are too small for them to fit with their cloaks and all from a quick test fit. Food for thought, I'd really love 32mm versions of the 25mm bases if that wouldn't be too difficult.
user avatar
User #26676065 - 17 Jan 20 17:13
You have to shrink the models like the wizard to a 25/28 mm scale to fit on a 25 mm base. Or you could make the 25 mm base bigger yourself. Use a ruler model for that.
user avatar
User #27877382 - 18 Jan 20 07:30
Making the 25mm base bigger myself would involve slicing the scatter off the base like the wizard hats, resizing the base itself, re-adding the scatter, slicing the added vertical height etc. I assume these meshes are already available to Cast N Play separately and it would be much less effort to just add 32mm bases if people want them. As for resizing the wizard, printed at default (32mm heroic or close to it) scale, the wizard hats on the heads of the wizards are 1:1 in scale with those on the bases. If I scale the wizards down, the hats won't be the same size so I might as well just scale the bases up in that case. I'm not unfamiliar with editing meshes by any means but I don't think it's too much to ask for themed bases that fit the models they released with.
user avatar
User #27725891 - 17 Jan 20 21:03
I just joined a few days ago and I can say I am nothing but impressed with the beautiful models you create. Congratulations on reaching your stretch goal, and hopefully you'll see many more!
user avatar
castnplay - 18 Jan 20 05:24
Thank you, Jeremiah! And welcome to the Cast :D
user avatar
User #27824874 - 16 Jan 20 18:45
reaching this goal is amazing and well deserved! you guys are my favorite Patreon for good reason!!!
user avatar
castnplay - 16 Jan 20 20:20
:D thanks for the kind words.
user avatar
User #30051313 - 3 Feb 20 19:11
I just joined because I love all of your models and oh boy I can’t wait for these vehicles!
user avatar
castnplay - 3 Feb 20 22:30
Welcome Josh, At this pace, they will be coming very soon! :D Excited about that!
user avatar
User #12126699 - 21 Jan 20 03:13
I'm a little confused, are you showing pictures of those vehicles that we will someday get or are now on your patreon? When I saw the post, I signed up now realizing that those admec tanks are not available.
user avatar
castnplay - 21 Jan 20 07:25
Hey Patric, they're part of our 1300 Patrons goal. They will all be released at once we reach that goal, along with an extra miniature added every month to the throwback folder, as the post says.
user avatar
User #20476715 - 16 Jan 20 17:56
Those are awesome I can't wait. I don't suppose there is anyway we could get them with a slot that a a standard base could slot in to so we could have our players minis in the vehicles?
user avatar
User #28163984 - 16 Jan 20 17:51
This is awesome! And exciting news!!
user avatar
User #10906003 - 16 Jan 20 18:00
Do we also get access to that vehicle that's at the top? It has your standard hyperlink at the bottom versus the hyperlink to the parking lot.
The Wizard's Guild January's Collection
The Wizard's Guild January's Collection more_vert
2020-01-15T18:44:51+00:00
Post file flag
The Wizard's Guild January's Collection 2020-01-15T18:44:51+00:00close

Guys! The Wizard's Guild complete collection is here!

Remember it will be available until January 31th.

MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE.

141_Hero Wizard

142_Dragon Sorceress

143_Kneazle

With and without wings (This file has been updated with the winged version)

144_Garm

145_Spells

146_Wizard Bases

147_Alchemist

148_Apprentice Wizard

149_Mounted Lizard

150_Wizard's Guild

151_Wizard Props

We hope you've enjoyed this collection as much as we did creating it.

Please, keep the feedback coming, it helps us continue improving everyday.

We're already working on next month's collection expect a couple of teasers in the following days.

You can find the complete collection now in the archive.

LINK TO THE ARCHIVE

  • RPG SOUNDS - KICKSTARTER

Also, we want to share with you our upcoming Kickstarter link: https://www.kickstarter.com/projects/alexzaragoza/rpg-sounds

By signing up you'll get notified once the campaign goes live, it really helps and we would really appreciate it if you did!

Also, there's gonna be awesome rewards for 3D Printing!

You're really awesome :D

Happy Printing!

Comments (41)
user avatar
User #6147918 - 26 Jan 20 04:19
this mind boggling amazing
user avatar
castnplay - 26 Jan 20 20:58
Thanks Scott!
user avatar
User #766754 - 15 Jan 20 18:48
Thanks for adding the wings to the cats!
user avatar
castnplay - 16 Jan 20 04:10
you are welcome!
user avatar
User #13184685 - 15 Jan 20 20:52
The file for apprentice wizard a seems to be corrupted.
user avatar
castnplay - 15 Jan 20 21:32
It should be working now :) Ty!
user avatar
User #3908321 - 22 Jan 20 03:09
The wizard guild look good, but the main room is supplied in such a size and design that it seems a bit difficult to make a good cut to fit on my printer. Any chance you can issue in 2 or 3 parts with no dimension greater than 200mm in the longest direction?
user avatar
castnplay - 22 Jan 20 04:24
Hi Don, there is a folder inside the Wizard's Guild called: 'Roof_Right_and_Main_Room_Cut'. Inside that, go to 'Main_Room'. You'll find the main room split into 3 parts right there, exactly as you described it. Cheers!
user avatar
User #26610006 - 16 Jan 20 06:58
This is outstanding!!!!! 💯❤
user avatar
User #19378692 - 21 Jan 20 22:04
Just wanted to follow up in case my other comment got lost in the mix, but something happened with guild_roof_left, roof_right_cut2, and roof_right_cut3 where the flat cut surfaces (for a printer bed) have a partial curvature to them. Some sort of issue with those STLs if you guys get a chance to take a look at them. Most of the guid needed netfabb repairs as well. Cheers!
user avatar
castnplay - 22 Jan 20 04:20
Hey Nicholas, I did check all the tiles, cut them and made sure they were flat. This is how the files from the archive look right know: https://imgur.com/JCQoRkl https://imgur.com/vfwOJNt Which is the curvature part are you talking about, did you download the latest models from the archive?
user avatar
User #19378692 - 22 Jan 20 04:47
Sorry hopefully these images work: https://drive.google.com/open?id=1FRzrhVnQQh0EG4zx8lOWJpvpqhWbV-Af https://drive.google.com/open?id=1Ogqm_JW-z9T9ABuSM8tA4UyCXMhwWmHn hard to share in comments here.. but I downloaded the latest Roof_right just now. If you place it with chimney up and slice then look at the first layer, there is a triangle in the corner where it is not flat. Another way to look at it is a wireframe view of the bottom--you can see the triangles bunched together on the corner underneath the chimney. It looks flat but it isn't and it shows up when trying to print the stl. Even after netfabb repair.
user avatar
castnplay - 22 Jan 20 08:36
Okay I updated the file. Looks like this now. https://imgur.com/a/rLnjcsb
user avatar
User #19378692 - 22 Jan 20 16:08
What you did successfully fixed roof left and roof_right_cut3. However, roof_cut2 still has the issue it now just looks different. Diagonal through the midsection rather than the corner under the chimney: https://drive.google.com/open?id=1R0AXJlD4_2079hL3kwtZXFFoKOQLGMY7
user avatar
User #16295073 - 16 Jan 20 03:03
This is massive!!
user avatar
User #27824874 - 17 Jan 20 00:22
Is there any difference to the early month release aside from Winged Kneazle? I went through each file but I dont want to miss anything. Thanks!
user avatar
castnplay - 17 Jan 20 13:24
No, Just that, and the hero wizard was updated a couple of days ago because of problems with the model :) But just that
user avatar
User #27877382 - 16 Jan 20 12:01
Would it be a lot of effort to slice the lizard mounts for a Photon bed? I've never done it myself and willing to give it a go, but figured I'd ask! Love this set, glad to be a patron!
user avatar
User #22406632 - 24 Jan 20 16:40
Am I missing something, it says the Wizards Guild is only available until January 13th. I thought the monthly releases were now being split in two and kept available till the end of the month.
user avatar
castnplay - 24 Jan 20 17:01
Where does it say that? It’s all available right now and will be until we release the 1st part of the Next Collection on February 1st.
user avatar
User #22406632 - 24 Jan 20 17:05
I swore this post said January 13th. It says the 31st, I guess I cant read....lol
user avatar
User #18054838 - 18 Jan 20 12:11
Apprentice Wizard A seems broken to me, can't be loaded :(
user avatar
castnplay - 19 Jan 20 04:01
I haven't been able to reproduce this problem. Appears to only happen in certain slicers. I did some changes to the file and then ran it through netfaab this morning. Please give it a try and let me know if it works for you now.
user avatar
User #18054838 - 19 Jan 20 04:33
All good now, re-download fixed the issue
user avatar
User #7701294 - 12 Feb 20 20:21
reallsy sad i missed them =(
user avatar
castnplay - 12 Feb 20 20:24
They are available in Gumroad and My Mini Factory. Remember that patreon have a 40% off code :D
user avatar
User #4555429 - 16 Jan 20 17:36
That's awesome! Bard college next? :P
user avatar
castnplay - 16 Jan 20 17:37
We have a couple cool bard coming out as rewards with our KS campaign, actually :D
user avatar
User #4555429 - 16 Jan 20 18:37
I thought that was for a sound app. O.o
user avatar
castnplay - 16 Jan 20 18:46
It is. But we’re gonna have 3d printables for supporters as well :)
user avatar
User #4555429 - 16 Jan 20 18:57
What if I just want the minis? >.>
user avatar
castnplay - 16 Jan 20 20:20
By supporting it you’ll get all the minis :)
user avatar
User #19378692 - 15 Jan 20 21:25
Great release! Would it be possible to get any more splits on the guild roof_right and main rooms? Not photon small, but even just to fit in standard 25x21x21cm volume. Also the cut surface of roof_left is not flat. Had to do repairs in netfabb on everything (prusaslicer) but i'm not sure if that is just me.
user avatar
castnplay - 16 Jan 20 03:59
Great suggestion. We're updating the folder with the cut models.
user avatar
User #19378692 - 16 Jan 20 16:49
Thanks! Also thank you for adding something ambitious and different like a large structure.
user avatar
User #19378692 - 16 Jan 20 17:45
Ok so one more update please. Something happened with guild_roof_left, roof_right_cut2, and roof_right_cut3 where the flat cut surfaces are not actually flat but have a slight curvature to them. I hope you know what I mean when looking at them. I'm sure not intended since they then can't be laid flat to print. Also, I don't know if this is a concern but most of the pieces in this set had to be run through netfabb for repairs on my end.
user avatar
User #17024275 - 15 Jan 20 18:50
exiting news. ist 150 still uploading, nothing in the archive yet.
user avatar
User #17024275 - 15 Jan 20 18:53
ahhh there it comes.
user avatar
User #22362541 - 15 Jan 20 18:51
Is #150 supposed to be in there? I can't find it.
user avatar
User #22362541 - 15 Jan 20 18:54
Now it popped up. All good.
user avatar
User #24339636 - 16 Jan 20 07:39
yay another kid!!
Time to vote! - Upcoming Collections! 2020-01-08T16:56:41+00:00

Hi, how's it going? It's time to vote for the upcoming collections!

February will bring Forest Creatures (that collection is turning out amazingly, can't wait for you all to see it).

This time we will only add 3 options to vote for, and the winner will be released during March. I know it's a month and a half away from now, but we have to plan ahead to bring you the best miniatures possible.

This time, only 1 vote allowed per Patron, choose wisely!

Don't forget we're running an FDM Only contest and the Winner will take home a brand new Elegoo Mars printer! There's still one week to submit your entry!

More info on the contest here:

https://www.patreon.com/posts/diorama-painting-31996223

Also, if you have not pre-registered for RPG Sounds, there's no better time to do it than now!

We've put a ton of effort, time and love into this project and with your help, we'll make it a reality!

https://www.kickstarter.com/projects/alexzaragoza/rpg-sounds

As always, thank you all for the support,
I hope you're all having a great year so far!

flag
Comments (23)
user avatar
User #25288912 - 9 Jan 20 01:38
A witch/warlock who hunts demons for their master, harnessing the power's of their dark lord. think of a demon bounty hunter bringing those pesky contract demons under heel for a master unseen in the shadows, now you can do dark imps and Familiars as well.
user avatar
User #760622 - 13 Jan 20 05:03
Thats a pretty sick idea.
user avatar
User #24602305 - 8 Jan 20 17:03
Queen of spiders will be great to see I haven't seen many spider variations.
user avatar
User #26181728 - 20 Jan 20 13:59
Would there be ettercaps and driders included in the spider queen bundle?
user avatar
castnplay - 21 Jan 20 07:26
Perhaps! Unfortunately it didn't win :(
user avatar
User #13184685 - 15 Jan 20 06:21
Whichever wins, please vary the humanoid minis a bit so that it's not just three poses of the same character.
user avatar
User #26960696 - 10 Jan 20 16:00
Okay, these comments have me convinced - Demon Hunters could be really fun! My hope would be for some characters who aren't totally grimdark serious... Maybe a dynamic duo of a big fighter and a scrappy researcher type?
user avatar
User #12511221 - 10 Jan 20 18:13
With all of the psionics UA coming out for D&D it would be nice to get some mystics and psion type characters.
user avatar
User #26676065 - 8 Jan 20 18:22
So hard to chose. Spiders are probably the most versatile.
user avatar
User #3918812 - 8 Jan 20 17:51
Oh, man. I keep getting outvoted in my patronages on things that I have no use for in campaign. I, unfortunately, already have too many demon related things in my STL library.
user avatar
User #22929783 - 8 Jan 20 18:01
Yeah we've had angels and demons already.
user avatar
User #18244975 - 8 Jan 20 18:12
But this isn't Angels and Demons, it's Demon HUNTERS /s. Yeah I think it's time to stop putting that as an option in all the patreons I back, because there's getting to be too many....and yes, that's a thing. I'd love to see less common sets: Minotaurs vs Centaurs, Anubis and other desert themed sets, Tieflings, Tabaxi of all sorts of styles.
user avatar
castnplay - 8 Jan 20 18:14
Demon Hunter’s Guild would have no Demons. As Chad said, we already had Angels vs Demons not too long ago.
user avatar
User #3918812 - 8 Jan 20 18:33
Totally. I just have no use for all the demons I already have from multiple Patreons, so not much use for those that would hunt them either :). I am sure they'll be awesome though, and obviously people want them. I may end up taking a break to see them and decided whether I can use them for something else. If I can I'll re-up mid month :)
user avatar
User #26960696 - 12 Jan 20 18:49
Yes yes yes to some Tieflings and Tabaxi!!!
user avatar
User #26676065 - 8 Jan 20 20:26
Will there be demon hunters like Illidan from WoW?
user avatar
castnplay - 8 Jan 20 20:36
Could be anything at this point. In fact, if you wanna go crazy with ideas and suggestions you’d make our lifes easier ;D
user avatar
User #26676065 - 8 Jan 20 21:15
Demon Hunters are known for harnessing the powers of demons to slay them. I think you most probably need some ideas for props. The following comes to my mind if I think about a demon hunter guild: An Altar of Power/Sacrifice , Demon Cages, a Notice Board where people can hang the Demon Bounties, a Trophy Room and lots of Traps. If you want, I can send you a PM with Demon Hunter images for inspiration.
user avatar
castnplay - 8 Jan 20 23:19
Awww yes, all great ideas :) And yeah, feel free to send them my way. Much appreciated
user avatar
User #12126699 - 20 Jan 20 13:25
Demon hunters like 40k inquisition? Or like diablo?
user avatar
castnplay - 20 Jan 20 17:11
I guess you could say more Diablo or Fantasy in general.
user avatar
User #25288912 - 9 Jan 20 01:34
oh I did not no i got to help with ideas.... A character who uses science in his search for demons instead of traditional magic or faith based abilities, think a Clockwork Ghostbuster from the dark ages.
user avatar
User #20112085 - 9 Jan 20 01:37
Demon hunters folks not demons and Angels. I have been looking for good hunter miniatures for my blood hunter!
RPG Sounds - Kickstarter Pre Launch
RPG Sounds - Kickstarter Pre Launchmore_vert
2020-01-07T22:58:51+00:00
Post file flag
RPG Sounds - Kickstarter Pre Launch 2020-01-07T22:58:51+00:00close

Hey Guys!

We've been working on something very special for almost half a year now in our spare time.

We literally just got approved to pre-launch and will be live in a couple of weeks on Kickstarter!

We've put a lot of love into this project and think you will all enjoy and find it very useful.

By signing up you'll get notified once the campaign goes live, it really helps and we would really appreciate it if you did!

Also, there's gonna be awesome rewards for 3d printing!

https://www.kickstarter.com/projects/alexzaragoza/rpg-sounds


Media (1)


BookGIF_01.gif (9.5MiB)

Comments (6)
user avatar
User #4828295 - 8 Jan 20 03:41
Wow this is so sick!!! When can we expect some more details? XD
user avatar
castnplay - 8 Jan 20 15:04
We’ll be posting more details in the following days and weeks :)
user avatar
User #16343262 - 8 Jan 20 11:46
Shared in the biggest german Pen&Paper group on FB. Hope that helps a bit.
user avatar
castnplay - 8 Jan 20 15:05
Wow! Thanks a lot. Really appreciated
user avatar
User #9871121 - 12 Jan 20 20:43
This is exciting! PLEASE just let it be castable (Chromecast)! I have a stereo in my game area and would love to play sounds over it rather than my phone, and so far all of the rpg sounds apps don't support casting.
user avatar
castnplay - 12 Jan 20 21:07
That’s something we’re planning for as stretch goals, Chromecast and Apple TV casting will be supported if we hit those milestones :D
January Throwback & Updated archivw
January Throwback & Updated archivwmore_vert
2020-01-02T01:17:00+00:00
Post file flag
January Throwback & Updated archivw 2020-01-02T01:17:00+00:00close

Hi Guys!

All the archive has been updated. The new releases and also the throwback.

Here's the list of this month's throwback selection:

000_The Tavern

08_Animal Totems

16_Demon Huntress

26_Golem Artificer

28_Gelatinous Cube

36_Dragon Beholder

94_Mother of Demons

LINK TO THE ARCHIVE

If you weren't able to download December's Collection please send us a DM and we'll help you out :)


HAPPY NEW YEAR!

from Cast n Play


Media (1)


Throwback_Jan2020.png (3.9MiB)

Comments (15)
user avatar
User #27096461 - 11 Jan 20 01:25
I just looked in the past posts but are all your sculpts support free or just minimal supports
user avatar
castnplay - 11 Jan 20 03:31
Shanan, our sculpts are not support free. You will need to make sure you support them accordingly in your the slicer you use before printing.
user avatar
User #13184685 - 2 Jan 20 08:21
139_Female Warrior, 140_Tournament Tents.
user avatar
User #364910 - 2 Jan 20 01:57
Was there a numbering issue due to a promotional release or something? I seem to be missing 139 and 140...
user avatar
castnplay - 2 Jan 20 17:19
I just sent you a private message with instructions on how to get those. Sorry for the inconvenience.
user avatar
User #20588467 - 4 Jan 20 09:47
Sooooo glad I didn't buy the Gelatinous Cube off Etsy. Now I can print it myself!
user avatar
User #26676065 - 4 Jan 20 17:08
If you print that, I would recommend you to hollow it and add a big hole on the bottom. This way you can hide miniatures inside of it. ;-)
user avatar
User #20588467 - 4 Jan 20 17:13
That's such a good idea!!
user avatar
User #23854675 - 4 Jan 20 02:23
so in "000_tavern" you have a folder "The Tavern Starter" but the files seem to be doubles of the 5 folders?
user avatar
castnplay - 4 Jan 20 02:39
Ah, thanks for pointing it out. It’s fixed now.
user avatar
User #13184685 - 2 Jan 20 08:22
EarthSpell from 145_Spells seems to be corrupted
user avatar
User #26276709 - 2 Jan 20 09:53
i can't open it either.
user avatar
castnplay - 2 Jan 20 17:23
Thanks for the heads-up. The model should now be working fine. Happy New Year!
user avatar
User #20014988 - 2 Jan 20 18:34
Is there a way to get notified when models are updated in this way? I downloaded earlier and wouldnt have known that the model was corrupted unless i happened to look at the comments here. I usually don't get to printing models until well after releases pass, so getting a quick "hey X file was having a problem please redownload" would be nice.
user avatar
User #26276709 - 2 Jan 20 20:23
I agree, I have 14 Patreons and follwing a few more its hard to keep up and the beginning of the month when all the files are dropped and issues need sorting can be a headache.
The Wizard's Guild & Changes in upcoming releases
The Wizard's Guild & Changes in upcoming releasesmore_vert
2019-12-31T15:07:20+00:00
Post file flag
The Wizard's Guild & Changes in upcoming releases 2019-12-31T15:07:20+00:00close

Hi guys, as you already know, January's collection will be 'The Wizard's Guild', we've been working hard to make this as badass as we possibly can.

Whit this we want to announce a small change we're making to the way we release minis. This change is not meant to be definitive. We will be trying different things out and we will stick to whatever works best for everyone.

The way it'll work in January is the following:
-'The Wizard's Guild' will be released in two batches. The first one is coming January 1st, and the second one is coming January 15th. You will no longer have to wait till the last week of the month to get the full collection.

-Old collections will no longer be available once the month is over. That means that 'The Grand Tournament' will no longer be available in the archive after December 31, 2019. (Go download it now! (If you're reading this in January and failed to download all the minis, shoot us a DM, we'll hook you up)

-We will also be updating the Throwback Folder on January 1st.

The reason for this is to improve the way we deliver minis to you. We also want to reduce spam and increase meaningfulness in our posts and announcements.

As always, if you have any feedback and suggestions about this or anything else, let us know. We love hearing back from you.

So...that's it for now, we're excited about what's coming in a couple of days, hope you like the minis!

Thank you all for your support, we can't say this enough, be really this is a dream come true.


Our best wishes to you and your families for 2020, keep being awesome human beings!

Comments (29)
user avatar
User #23696798 - 31 Dec 19 15:29
Definitely on board!
user avatar
User #766754 - 31 Dec 19 15:10
If you just add a couple of wings to those cats they be pretty cool tressym
user avatar
castnplay - 31 Dec 19 15:13
Maybe we can do it for the second release :) For sure
user avatar
User #4816632 - 31 Dec 19 16:48
I really like the changes! It'll be nice to get the full load of minis earlier in the month. I just wish we had a bit more notice that the Tournament final download was not going to be available after today, but thanks for accommodating those of us who are traveling!
user avatar
castnplay - 31 Dec 19 17:08
I know, I know it is short notice. I’d love to have more time as well. If you (or anyone) fail to download the models, shoot us a dm. I’ll send them to you via email.
user avatar
User #4816632 - 1 Jan 20 17:09
Will do! Thank you guys for being understanding!
user avatar
User #3199130 - 31 Dec 19 19:25
Like going to two releases, but really liked the rolling releases for previous months. Especially when I joined, it was great to start out with a full month of minis compared to other Patreons.
user avatar
User #21533769 - 31 Dec 19 22:34
Yeah the changes make sense. But on the other hand however some did not download thr last package yet due to the convenience that one can download it next week as well. A change like that to be announced on new years eve while everyone is not at home is quite... Not nice for those kind of people as they can't download the stuff by tomorrow. Informations like these should be announced some days earlier. Just my opinion.
user avatar
User #19418223 - 1 Jan 20 01:10
Yeah, Leaving it accessible for a couple weeks or the next month seems the most fair. I'm literally getting on a plane tonight, and if I hadn't checked Patreon because of all the messages I got from mz4250 today, I never would have known this was happening and would have been screwed. This is honestly making me rethink things going forward.
user avatar
User #20320386 - 1 Jan 20 01:32
They have said any current patron who can't download them in time can just dm for the files from December so sounds like they are doing what they can to cover this.
user avatar
User #146215 - 1 Jan 20 00:44
Great to hear!!! Unfortunately I won’t be able to download the December models in time :(. What to do??
user avatar
User #19539906 - 1 Jan 20 12:00
Send them a DM. They will send you a download link.
user avatar
User #219943 - 31 Dec 19 18:12
For what it's worth I liked how you released models. Oh well. I will adapt. :)
user avatar
User #3759713 - 31 Dec 19 15:22
Are you doing a poll for which Throwback minis we're missing? Or did I miss it?
user avatar
castnplay - 31 Dec 19 15:42
It's coming! It's scheduled for later today :)
user avatar
User #13875137 - 31 Dec 19 15:12
This sounds good! 4 releases a month was not really easy to follow to me.
user avatar
User #23145974 - 31 Dec 19 17:59
The changes sound awesome! I love the idea of 2 releases. Less stressing to get them constantly :) thanks!
user avatar
User #188507 - 31 Dec 19 15:32
good changes, thank you for that!
user avatar
User #3759713 - 31 Dec 19 15:21
These look great! Less releases in a month sounds good too, like everyone else, it seemed like a lot to keep up with (for your as well, I'm sure).
user avatar
User #24339636 - 1 Jan 20 13:53
Do you people even read? Just send the PM if you are unable to download the stuff from last month.
user avatar
User #18244975 - 2 Jan 20 07:54
Right, it's almost like they thought of that and said it in the original post, directly after announcing the change. People just read that they couldn't download it and immediately stopped reading and came to the comments section to complain.
user avatar
User #26271529 - 31 Dec 19 15:29
Great release, modela are amazing...I love the spell effects, looking forward into seeing how people are going to incorporate them
user avatar
User #27824874 - 31 Dec 19 18:41
The hounds will fit in great with my current campaign setting!
user avatar
User #27824874 - 31 Dec 19 18:40
First release looks amazing! After seeing the cats, I’m excited to see more! My familiar is a displacer kitten 😂 would love to see more terrain like spell effects like walls of fire / ice etc!
user avatar
User #3843617 - 31 Dec 19 15:11
Fewer release dates means less chance of missing something so I'm looking forward to this. The models look great as always!
user avatar
castnplay - 31 Dec 19 15:13
Exactly :)
user avatar
User #27096461 - 3 Jan 20 00:33
how do i get the coupon code for stuff in your myminifactory?
user avatar
castnplay - 3 Jan 20 19:12
Just sent it to you in a DM :)
user avatar
User #4555429 - 31 Dec 19 17:46
I like the changes! The way you were doing it didn't bother me too much though, I downloaded stuff at the end of the month either way. Also, it's that a blink dog, or some kind of cat?
Diorama Painting Contest: Update
Diorama Painting Contest: Updatemore_vert
2019-12-27T21:57:04+00:00
Post file flag
Diorama Painting Contest: Update 2019-12-27T21:57:04+00:00close

Hi Guys!

We decided to extend the due date for the Diorama Contest to January 15th, 2020, so you'll have more time to prepare your entry!

You can post your entry in our FB page: https://www.facebook.com/groups/1352680144856176

Or in our Discord in the "painting-contes-entries" channel: https://discord.gg/5hPWpjA

We are so excited to see how they come out.

Don't forget to use the Hashtag : #CastNPlayDioramaContest with your entry.


*THIS CONTEST IS JUST FOR FDM PRINTS*

To check all the rules: https://www.patreon.com/posts/diorama-painting-31996223

Remember that the 1st place wins an awesome Elegoo Mars! Don't miss out!

Good Luck everyone :D


Media (1)


CastnPlayGiveaway_ElgooMars.png (3.5MiB)

Comments (8)
user avatar
User #9113869 - 30 Dec 19 14:32
Hey that's my birthday! That would make an awesome bday gift :) Just saying
user avatar
castnplay - 30 Dec 19 15:01
Indeed! :D
user avatar
User #12858588 - 28 Dec 19 00:58
Does it have to be humanoid minis or can it but stuff like the trees and fences from some of the collections?
user avatar
castnplay - 28 Dec 19 19:09
At leat 2 characers. The rest can be whatever. From any collection
user avatar
User #893228 - 27 Dec 19 21:58
Thank you so much! Now I actually have time to do it 😍
user avatar
castnplay - 28 Dec 19 19:09
Can't wait to see your submission :d
user avatar
User #12276336 - 28 Dec 19 05:34
Could I do a second one even though i've submitted one? :P
user avatar
castnplay - 28 Dec 19 19:09
Absolutely!
The Grand Tournament: Release 4
The Grand Tournament: Release 4more_vert
2019-12-27T18:43:16+00:00
Post file flag
The Grand Tournament: Release 4 2019-12-27T18:43:16+00:00close

Guys! The final release of the year is here!

We hope you've enjoyed this collection as much as we did creating it.

We want to thank everyone for all the support you gave us during this year. We have learned a lot and we love creating all these minis for you.

Please, keep the feedback coming, it helps us continue improving everyday.

Also, there are going to be a lot of surprises, and new improvements next year, stay tuned.

We're already working on next month's collection expect a couple of teasers in the following days.

You can find the complete collection now in the archive.

LINK TO THE ARCHIVE

You're really awesome :D

Happy Printing!

Comments (11)
user avatar
User #13816345 - 28 Dec 19 09:33
Those female elves were a surprise, but OH BOI are those awesome.
user avatar
User #23836737 - 19 Jan 20 10:40
Hello, I am in the same situation of Gareth and Andrew, I was out and I can't download the file, please can you send me theway to get wave3 and 4 tournment files. Thanks for your great job..
user avatar
castnplay - 20 Jan 20 05:58
I just sent you a DM
user avatar
User #15691958 - 27 Dec 19 19:19
Will the grand tournament be available when I join on January 1st?
user avatar
castnplay - 27 Dec 19 19:26
Hi Don, The Grand Tournament will not be available on January 1st. On the 1st day of January we will release the first half of ‘The Wizard’s Guild’ and on the 15th we will release the second half of it. Same amount of models, just less releases. We will also be updating the Throwback Folder on January 1st. So, the current Throwback models will not be available either.
user avatar
User #7644142 - 27 Dec 19 21:11
any preview of the wizards guild?
user avatar
User #8039585 - 3 Jan 20 23:18
I was without internet for 3 weeks due to moving property and missed Tournament Wave 3 and 4. Any way I can get these at all? Apologies for the inconvenience
user avatar
castnplay - 4 Jan 20 00:23
Hey Gareth, no need to apologize and not an inconvenience at all. I just sent you information on how to get those files :) Cheers!
user avatar
User #27096461 - 27 Dec 19 18:47
Thanks for all your hard work. I'm printing the tent now. Now about that carnival theme pack......lol
user avatar
User #9168167 - 2 Jan 20 17:10
I've been out of town the link doesn't have these files anymore its just been a week
user avatar
castnplay - 2 Jan 20 17:24
I just sent you instructions in a private message on how to get those. Sorry for the inconvenience.
The Grand Tournament: Wave 4
The Grand Tournament: Wave 4more_vert
2019-12-25T22:24:00+00:00
Post file flag
The Grand Tournament: Wave 4 2019-12-25T22:24:00+00:00close

Guys! Our final release of the month, and also the last of the year is almost here!

***IMPORTANT***
This fourth release will count as 2 slots in the archive:

  • 139_Female Warrior
  • 140_Tournament Tents

That means that the following will be gone during the weekend:

  • 128_Ghost Pirate
  • 129_Undead Pirate Ship

***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

Lastly, if you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

Cheers, and

Merry Christmas to everyone!


Media (1)


TGT_Release4_glossary.png (11.5MiB)

Comments (7)
user avatar
User #724448 - 26 Dec 19 02:19
These are all wonderful. Thank you.
user avatar
castnplay - 26 Dec 19 02:37
Thanks for the kind words, Katrina!
user avatar
User #13922138 - 26 Dec 19 10:05
They look awesome!
user avatar
User #23227696 - 26 Dec 19 02:10
Not sure if my comment influenced the publishing of that female warrior but she look awesome and I am sure my daughter will love her ! Thank you
user avatar
castnplay - 26 Dec 19 02:37
Absolutely, Renaud! Glad you liked it :)
user avatar
User #903337 - 27 Dec 19 00:36
Looks great, but I'm not seeing a link to them in the Archive. It still has the Ghost Pirates & Ship.
user avatar
castnplay - 27 Dec 19 00:43
It’s releasing tomorrow morning! :)
Painting Contest Winners
Painting Contest Winnersmore_vert
2019-12-23T01:21:13+00:00
Post file flag
Painting Contest Winners 2019-12-23T01:21:13+00:00close

Thank you everyone for participating in our first painting Contest, it was really awesome seeing such cool entries.

AND THE WINNERS ARE..... 🥁🥁🥁🥁🥁🥁


We really love all of them and it was a really tough decision, so not only the top 5, but the top 10 will be getting 1 free month of Cast n Play's Patreon.

Here are places 6th to 10th in no particular order.

Edit: DON'T FORGET WE'RE RUNNING ANOTHER CONTEST. AND ANOTHER ELEGOO MARS TO THE WINNER, INFO HERE: https://www.patreon.com/posts/diorama-painting-31996223

THANK YOU ❤️

Comments (3)
user avatar
User #724448 - 23 Dec 19 18:32
Congratulations! There are some inspiring pieces there.
user avatar
User #188507 - 23 Dec 19 07:31
Wow, thank you very much! With so many awesome entries I did not expect a chance to get even the second place. And Marie-Claude really earned the first place for sure. Congrats!
user avatar
User #10376174 - 23 Dec 19 02:08
Congratulations to all the winners
The Grand Tournament: Release 3
The Grand Tournament: Release 3more_vert
2019-12-20T16:50:52+00:00
Post file flag
The Grand Tournament: Release 3 2019-12-20T16:50:52+00:00close

FRIDAY!

Time for the third release of the month!

You'll find now all these models in the archive.

Thank you a lot and please, consider sharing with us on Discord or Facebook your prints. It helps a great deal to spread the word.

LINK TO THE ARCHIVE

Enjoy your weekend and

Happy printing :D

The Grand Tournament: Wave 3
The Grand Tournament: Wave 3more_vert
2019-12-18T17:41:02+00:00
Post file flag
The Grand Tournament: Wave 3 2019-12-18T17:41:02+00:00close

It's time to see what's coming this week! :D

This third release will count as 3 slots in the archive:

136_Elvish Champion

137_Medieval Bleachers

138_Targets

That means that the following will be gone during the weekend:

125_Undead Pirates Beast

126_Canon Props

127_Cursed Crew Bases

***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

Lastly, if you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

We hope you are having a nice week.

Cheers!


Media (1)


TGT_Release3_glossary.png (7.7MiB)

Comments (8)
user avatar
castnplay - 18 Dec 19 20:52
If you ever miss one, though. Let us know. We’ll send it over some other way.
user avatar
User #22309673 - 19 Dec 19 01:06
I don't check every day. Just *nearly* every day. Not the same thing at all!
user avatar
User #10311433 - 18 Dec 19 20:46
I think the rolling nature of the content means it’s best to check in a bit more often so as not to miss anything?
user avatar
User #25136101 - 18 Dec 19 19:55
so if I download just once a month, I should be getting everything?
user avatar
castnplay - 18 Dec 19 20:52
Most of the times, once a month should be fine. But if you really wanna make sure you don’t miss anything, once every 3 weeks would be the safest route.
user avatar
User #10311433 - 21 Dec 19 19:25
Hi guys, I wonder if it might be possible to slightly thicken or strengthen the swords of the elf champions? I printed two, and both blades broke off incredibly easily. I know it’s desirable to keep them thin and sharp looking, but they are extremely fragile even when I was being delicate with them.
user avatar
User #26676065 - 22 Dec 19 18:15
What resin do you use? My prints are pretty solid. Didn't try to drop them but they can handle a little bit force. Printing direction is important for strength too.
user avatar
User #10311433 - 22 Dec 19 19:20
Elegoo grey, which is somewhat flexible and robust on my other prints. The swords break at the little narrow spot by the hilt for me.
The Grand Tournament #3: Pre-release
The Grand Tournament #3: Pre-releasemore_vert
2019-12-17T23:29:12+00:00
Post file flag
The Grand Tournament #3: Pre-release 2019-12-17T23:29:12+00:00close

The third release is comming soon, and here are a couple of free minis of this week release: gum.co/YmOtX

Enjoy!

ONE DAY LEFT!
ONE DAY LEFT!more_vert
2019-12-14T23:14:23+00:00
Post file flag
ONE DAY LEFT! 2019-12-14T23:14:23+00:00close

Guys!

Time is almost over!

Don't miss the chance to get this awesome printer!

You can share your sumbission on Facebook https://www.facebook.com/groups/1352680144856176

or in our discord group.

The Grand Tournament: Release 2
The Grand Tournament: Release 2more_vert
2019-12-13T18:26:24+00:00
Post file flag
The Grand Tournament: Release 2 2019-12-13T18:26:24+00:00close

FRIDAY... Time for the second release of the month!

You'll find now all these models in the archive.

Please, consider sharing with us on Discord or Facebook your prints and paintjobs. We enjoy a lot seeing them!

Have a nice weekend and,

Happy printing :D

ARCHIVE

The Grand Tournament: Wave 2
The Grand Tournament: Wave 2more_vert
2019-12-11T17:32:44+00:00
Post file flag
The Grand Tournament: Wave 2 2019-12-11T17:32:44+00:00close

Hi Guys!

The second release is almost here, with 22 new models this week!!!

***IMPORTANT***

This second release will count as 3 slots in the archive:

133_Young Squire

134_Halfling Fighter

135_Tournament Props


That means that the following will be gone at the end of the week:

122_Undead Pirate Captain

123_Floor Scrubber

124_Undead Pirateship Props

***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

Lastly, if you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

We really hope you like them :)


Media (1)


TGT_Release2_glossary.png (7.5MiB)

Comments (26)
user avatar
User #724448 - 11 Dec 19 17:37
Really liking this set.
user avatar
User #8364548 - 11 Dec 19 18:50
Any chance at getting the banners* as blanks so we can add our own heraldry designs?
user avatar
User #4555429 - 11 Dec 19 19:28
Banners*
user avatar
castnplay - 11 Dec 19 19:28
Sure :)
user avatar
User #2345733 - 12 Dec 19 01:59
Good call Sam, and thank you Creator
user avatar
User #4555429 - 11 Dec 19 19:35
I love 99.9% of this. However, the halfling being barefoot and having large hairy feet bothers me a lot. Halflings are not hobbits and the lore does not say anything about them being barefoot. Nor having hairy feet. In fact, the official art of a halfling in the player's handbook shows a bard wearing boots. And if bards aren't barefoot, a fighter certainly shouldn't be.
user avatar
User #10510673 - 11 Dec 19 22:15
I too prefer halflings and warrows to hobbits!
user avatar
User #600380 - 11 Dec 19 23:01
I mean... halflings were Gygax's IP dodge when the Tolkien estate got on his case about including hobbits. He chose that term because halfling is a synonym for hobbit in the LotR books. Granted, halflings have diverged from Tolkien hobbits since the days of Gygax, but I think it's disingenuous to say they definitely aren't hobbits.
user avatar
User #4555429 - 11 Dec 19 23:02
They used to be hobbits. They are not hobbits now. Therefore saying that they aren't hobbits is completely accurate.
user avatar
User #26181728 - 12 Dec 19 11:53
These could very well be first edition halflings, in which this depiction is accurate.
user avatar
User #26181728 - 12 Dec 19 11:54
I think the giant meat cleaver daggers are more so an issue.
user avatar
castnplay - 12 Dec 19 15:52
Thank you all for your comments. Just FYI, we’re uploading a version of these guys with a smaller blade as well. So that You can use the one you like better.
user avatar
User #16932744 - 11 Dec 19 18:31
Too cartoonisch fir my taste, sorry. I used to love this patreon, but I am afraid gonne leave...
user avatar
castnplay - 11 Dec 19 18:41
Sorry to hear that, Jack. Still, we’re very thankful for your support and trust over the past months. Would you mind elaborating on what you don’t like? We’re always trying to improve and we’d appreciate the feedback a lot.
user avatar
User #19994472 - 12 Dec 19 21:15
I'm afraid, I share Jack's concerns; having a cartoonish or funny character now and then is fine, but if the cartoonish look becomes your trademark, I might leave as well. I like to print detailed figures and props to be used for painting or gaming purposes or for dioramas, so features like the halfling's exaggerated sword just don't do it for me, sorry!
user avatar
castnplay - 12 Dec 19 21:23
As we said before, we’re also releasing a halfling version with a normal sized sword. Apart from that, what else is it that you don’t like? The reason for all these questions is we haven’t changed anything in our workflow. And I’m trying to figure out what’s exactly the thing you don’t like, so that we can address the issue.
user avatar
User #16932744 - 13 Dec 19 12:04
Well, the huge oversized weapons certainly are one of the reasons, getting smaller, more realistic weapons an option is great! It is also perhaps the face (expresions) who look like cartoons, When creating some kind of fantasy creature I guess that is not that much of a issue, but with humans the face should be more realistic, in my opinion. Don't know exactly how to explain it better
user avatar
castnplay - 13 Dec 19 15:36
Gotcha! Thanks for the feedback, It’s super helpful!
user avatar
User #26676065 - 13 Dec 19 16:01
I can tell you why they think this style is cartoonish, it's because of the huge heads compared to the bodies. It was an unfortunate decision to include kids and halflings in the same release because both tend to have big heads and small bodies. In my opinion your style hasn't changed from the earlier models. The quality of your models even have improved. People think your style has changed because we haven't seen any fierce looking creatures in a while. To many prop models have not helped either. My recomendation would be to include a fierce looking moster or two every second week. And maybe you should save the Props to include them in a set with a bigger model like the pirate ship. Your first release of the set should have more characters. You can tone it down at the end and end the set with a big model release. The first impression is what matters, you know. Just my opinion, hope I could help.
user avatar
castnplay - 13 Dec 19 17:36
Lifebearer, thanks for putting this paragraph together. These kind of comments really help us improve! We will definitely be taking all the feedback into consideration :)
user avatar
User #18046473 - 18 Dec 19 04:47
You all are SOOOOO close to Arthur from Ghost'n Goblins. https://www.bigbadtoystore.com/Product/VariationDetails/54056
user avatar
User #13184685 - 12 Dec 19 05:00
I would prefer less poses in exchange for more faces. As it is, I can only use about a third of the minis, otherwise it's going to be rather uncanny.
user avatar
castnplay - 12 Dec 19 15:51
Gotcha. By faces, you mean heads, right? (Face, expression, hair, etc)
user avatar
User #13184685 - 12 Dec 19 18:50
Different heads would be very nice.
user avatar
User #22026035 - 11 Dec 19 17:43
Phenomenal
user avatar
User #2345733 - 12 Dec 19 02:01
Hobbitses are a kind proud folk, them their footses alone!
 The Grand Tournament #2: Pre-release
The Grand Tournament #2: Pre-releasemore_vert
2019-12-09T16:59:54+00:00
Post file flag
The Grand Tournament #2: Pre-release 2019-12-09T16:59:54+00:00close

The second release in coming soon, we hope you enjoyed the first one, we are loving how the minis are coming out.

Here's a freebie from this week for you to enjoy :)

gum.co/pjCiC

Have a great week!

Comments (5)
user avatar
User #23227696 - 12 Dec 19 01:23
That would be great ! Thank you
user avatar
castnplay - 9 Dec 19 17:10
Yes! Along with 3 more poses and another character!
user avatar
User #23227696 - 10 Dec 19 08:40
Will we get an alternate version for a young girl ? Just longer hair would be great. I have difficulties finding young girl minis to play with my daughter. And she like fighter archetype better than caster
user avatar
castnplay - 10 Dec 19 15:44
That’s a great idea. We’ll try to have that done for the release :)
user avatar
User #724448 - 9 Dec 19 17:09
He will be in the release on Friday?
7 DAYS LEFT TO ENTER THE CONTEST TO WIN THE LIMITED EDITION ELGOO MARS PRINTER
7 DAYS LEFT TO ENTER THE CONTEST TO WIN THE LIMITED EDITION ELGOO MARS PRINTERmore_vert
2019-12-08T21:33:22+00:00
Post file flag
7 DAYS LEFT TO ENTER THE CONTEST TO WIN THE LIMITED EDITION ELGOO MARS PRINTER 2019-12-08T21:33:22+00:00close

Guys!

There are only 7 days left to enter the contest!

Don't miss the chance to get the My Mini Factory Limited Edition Elgoo Mars Printer!

To see the rules and other cool prizes go to: https://www.patreon.com/posts/end-of-year-31446361


Also, go and check out all the awesome entries we've got so far in our fb group: https://www.facebook.com/groups/1352680144856176

The Grand Tournament: Release 1
The Grand Tournament: Release 1more_vert
2019-12-06T16:36:01+00:00
Post file flag
The Grand Tournament: Release 1 2019-12-06T16:36:01+00:00close

FRIDAY.... Time for the first release of the month!

You'll find all these models in the archive right now.

Please, consider sharing with us on Discord or Facebook your prints. It helps a lot to spread the word.

Have a nice weekend and,

Happy printing :D

ARCHIVE

The Grand Tournament: Wave 1
The Grand Tournament: Wave 1more_vert
2019-12-04T22:06:10+00:00
Post file flag
The Grand Tournament: Wave 1 2019-12-04T22:06:10+00:00close

The first release is almost here!

This week´s release will count as 3 slots in the archive:

130_Mounted Warrior

131_Fighting Pit

132_Weapon Racks

That means that the following will be gone this week:

119_Cursed Skeleton

120_Deathly Canon Skeleton

121_Pirate Escape Boat

***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

If you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

Happy week guys!


Media (1)


TGT_Release1_glossary.png (6.7MiB)

Comments (11)
user avatar
User #724448 - 4 Dec 19 22:41
Nice!
user avatar
User #6731158 - 5 Dec 19 20:38
Ooooookay CastNPlay. You win! You really reeled me in with that pirate set, and you KNOW I need that ship before it's gone, haha. I'm running a Ghosts of Saltmarsh campaign and these models look like must-haves! Quick question: At the top of the screen it says you are running a promotion until 12/7. When I click on the link it just takes me to a page to pay for next month's release. What is the promotion?
user avatar
castnplay - 5 Dec 19 20:46
First of all, welcome! We’re so happy to finally have you here :D The promotion is the last chance to get the minis listed in the promotion banner in our home page. When the promotion ends, those minis will only be available through our online stores and not here anymore.
user avatar
User #19994472 - 4 Dec 19 22:44
Excellent! Love the horse poses!
user avatar
User #4555429 - 4 Dec 19 22:19
This looks great!! I wish there was some more variety in the armors so we could set up multiple competitors, but maybe that's coming in the future releases. :D
user avatar
User #26422404 - 4 Dec 19 22:37
Oh sweet! I agree with more variety needed, just simple helmet swap would be great, but I'd definitely love more poses and weapons for the standing knight! Would be amazing for making an arena with multiple fighting knights!
user avatar
User #26676065 - 5 Dec 19 12:53
I agree for more knight variety. Maybe some knights with swords?
user avatar
User #22026035 - 5 Dec 19 16:42
1. FLAILS! Yes, we need more flails 2. The top left picture, the Knight on the horse....I absolutely love how he's holding that lance. There's way too many mini's out there with super aggressive poses, this looks like he's relaxed and trying to figure out what's what!
user avatar
User #19539906 - 6 Dec 19 09:39
I love this, it gave me ideas to include this in my current game :) Are you planning to include proper jousting poses (with a long tournament lance, instead of the shorter version in this first part)? Or a way to swap between different lengths of lances?
user avatar
User #16932744 - 6 Dec 19 18:02
Somehow I get the feeling your style becomes somehow more and more cartoon style, or is it just me...
user avatar
User #18054838 - 9 Dec 19 11:59
Yeah...while I don't mind it, this particular update is not of my interest at all.
December's Throwback
December's Throwback more_vert
2019-12-03T00:08:35+00:00
Post file flag
December's Throwback 2019-12-03T00:08:35+00:00close

Hi Guys!

December is here, and so December's throwback.

Here's the list of this month's selection:

06_Gnome

19_Mage King

32_Battleram

38_Trolls

54_Human Bard

56_Pegassus

74_Undead Bear

LINK TO THE ARCHIVE

Thank you for your support.

Enjoy :D


Media (1)


Throwback_CastNPlay_Dic19.png (4.4MiB)

Comments (16)
user avatar
User #10248000 - 3 Dec 19 02:03
Battleram!
user avatar
User #16932744 - 3 Dec 19 19:34
Ow, somehow I also missed the november throwback download. Any chance I can still get it somehow?
user avatar
User #12457717 - 4 Dec 19 21:08
Looks like the Pegasus_Free model is corrupt in your upload. I have tried downloading it compressed and just the STL, both are coming up corrupted.
user avatar
castnplay - 5 Dec 19 17:27
Should be all good now! :)
user avatar
User #12457717 - 5 Dec 19 17:30
Works great now!
user avatar
User #16823390 - 3 Dec 19 00:15
Great, thanks :)
user avatar
User #4828295 - 3 Dec 19 06:16
Awesome! What was the throwback for November? I don't remember seeing a post about it and didn't look in that folder before you changed them...
user avatar
User #6047992 - 3 Dec 19 07:36
Here's what I see in my November download for throwbacks as of Nov 30th: 10 - Kid Mage 17 - Fire Golem 20 - Nightmare Horse 25 - Ancient Treant 27 - Goatman 33 - Knight Statue 44 - Prisoners in cages
user avatar
castnplay - 3 Dec 19 15:35
Correct!
user avatar
User #19994472 - 3 Dec 19 06:52
cool! Could you include 18_Temple bases as a choice for next month? That would be great (you can never have too many bases...) :)
user avatar
castnplay - 3 Dec 19 15:33
We’ll send a poll at the end of this month. I’ll make sure bases are in there :)
user avatar
User #10376174 - 3 Dec 19 00:26
Awesome I don't have any of these
user avatar
castnplay - 3 Dec 19 15:35
Hell yeah!
user avatar
castnplay - 3 Dec 19 15:35
:D
user avatar
User #23145974 - 3 Dec 19 00:29
Yes!!! I wanted several of these :)
user avatar
castnplay - 3 Dec 19 15:35
Glad to hear tha!
The Grand Tournament #1: Pre-release
The Grand Tournament #1: Pre-releasemore_vert
2019-12-02T18:32:30+00:00
Post file flag
The Grand Tournament #1: Pre-release 2019-12-02T18:32:30+00:00close

There’s a lot of minis coming for you in this collection, we thing you’re really going to enjoy them, as they can be used in lots of different ways.

Here’s the first freebie of the month.

Have a great week!

Download:

https://gumroad.com/l/SkHDz?

Comments (19)
user avatar
User #930048 - 2 Dec 19 21:53
This doesn't have the same feel as your usual stuff. It doesn't feel alive in my opinion.
user avatar
User #26676065 - 2 Dec 19 19:19
Do we get a king? Or a dragon? Can't wait to see what you have for us!
user avatar
User #23145974 - 2 Dec 19 18:40
Oohhh. This is gonna be awesome!
user avatar
User #27096461 - 2 Dec 19 23:05
This will make a great suit of armor that may or may not come alive ....
user avatar
User #3908321 - 3 Dec 19 19:12
There's a lot of open neck. He'd probably have a tall gorget (leather neck style with external metal plates for and aft) for mobility (head can turn) when fighting on foot, or an over sized bevor, allowing the helm to rotate behind it, that would also work when mounted. The pole axe with a butt spike is great.
user avatar
User #27653223 - 2 Dec 19 18:47
Great model but a lite to static
user avatar
User #27203074 - 3 Dec 19 03:28
I am hoping we get an add on month, where we can expanded add on's to some of the sets we got now.
user avatar
castnplay - 3 Dec 19 15:35
I’ve been thinking that as well! Maybe next poll we should do it :D
user avatar
User #19994472 - 3 Dec 19 19:33
If this is a tournament fighter, then using a staff-like weapon like this is fine, but they would be unlikely to wear such heavy armour. I could be wrong, but I think this chap is on guard duty and needs a proper lance, or better even a halberd..
user avatar
User #22519530 - 4 Dec 19 03:38
Tournament armor was in fact heavier than war Armour. Especially for the joist which often locked the rider into place unable to move. The reason behind this is that you didn't need to be near as mobile for your event and would only have it on for the 5-10 minutes needed for the match and not hours on end as with combat. Much of the surviving armor for this reason was tournament Armour which is why people associate armor with being much heaver than it was. Also unless he is expecting combat with another heavily armored fighter and has some close range support to keep the enemy back and give him striking room, the short spear is the way to go for a guard.
user avatar
User #19994472 - 2 Dec 19 19:58
Nice! finally, we are back to more realistic figures (i really did not like the last cartoony releases!)
user avatar
User #26676065 - 3 Dec 19 12:32
I don't see a difference in the style thought.
user avatar
User #10376174 - 2 Dec 19 18:34
Ooh awesome. I've started on printing the cursed ship still got lots of printing to do my photon is working overtime 😂 😂
user avatar
castnplay - 2 Dec 19 18:35
Ours took WAY more than expected. But we finally finished printing it today. We’re glueing it together right now. We’ll post pictures soon :D
user avatar
User #10376174 - 2 Dec 19 18:36
Nice cant wait to see it
user avatar
User #22623508 - 3 Dec 19 15:39
This looks almost Sci fi to me. Curious to see the rest of the models
user avatar
User #19994472 - 2 Dec 19 19:59
One suggestion: the lance seems a bit short for a guard..
user avatar
User #19539906 - 3 Dec 19 01:23
My thoughts as well.
user avatar
User #3908321 - 3 Dec 19 19:16
Having done some SCA heavy fighting, I'd like to say that the pole axe with butt spike is a good size for tourney fighting, a bit short for melee. An effective form is to hold it up and down and block on the haft by rotating toward a shot, but he needs gauntlets to pull that off.
Diorama Painting Contest! (FDM ONLY)
Diorama Painting Contest! (FDM ONLY)more_vert
2019-12-01T14:54:08+00:00
Post file flag
Diorama Painting Contest! (FDM ONLY) 2019-12-01T14:54:08+00:00close

Hey guys!

This is another contest we'll be running this month! (THIS IS NOT THE SAME CONTEST WE'VE BEEN TALKING ABOUT IN THE PAST WEEKS). So yes, we're giving away another Elegoo Mars to the 1st place! This time, only FDM printed entries will be able to compete.

Best of lucks!

*Please read through these rules carefully*

Rules:

-Print and Paint a Diorama using ANY of the Cast n Play Models

-Use at least 2 characters and 1 big terrain piece.

-The miniatures can be scaled up to 150% of the original scale, NO MORE.

-No digital painting/editing allowed.

-Photographs submitted have to be at least 512x512 pixels in resolution to be considered. There are no restrictions in terms of aspect ratio.

-No restrictions on the printer as long as it's an FDM one.

-The deadline will at 11:59 pm CST on December 31th, 2019.

-Winner will be announced during January 2020.

-Post on our Facebook Group a picture of your painted mini using the hashtag #CastnPlayPaintingContest

https://www.facebook.com/groups/1352680144856176/

*(Non-Facebook users, we'll open a Discord channel to post your entries and we'll post them for you on our Facebook Group)

WE WILL NOT CONSIDER ENTRIES IN ANY OTHER PLATFORM OTHER THAN FACEBOOK AND DISCORD.

-While this is not a photography contest, we expect good lit photographs to be able to judge as fair as we possibly can.



Media (1)


CastnPlayGiveaway_ElgooMars.png (3.5MiB)

Comments (8)
user avatar
User #23424106 - 1 Dec 19 22:25
Do the minis have to be FDM printed too or just the scenery?
user avatar
castnplay - 2 Dec 19 02:59
Everything has to be FDM :)
user avatar
User #22003085 - 3 Dec 19 13:14
Can we create some stuff to support the miniatures and terrain pieces for the diorama? (For example, the side of a mountain or some wall for a dungeon)
user avatar
castnplay - 3 Dec 19 15:32
Absolutely. Just try to keep it no lower than 90% Cast n Play’s models.
user avatar
User #23634226 - 2 Dec 19 00:26
i think both have to be fdm
user avatar
User #285046 - 2 Dec 19 01:55
Thank you for giving those of us with FDM printers a fighting chance at one of these contests!!
user avatar
User #21351346 - 7 Jan 20 12:44
Open to Anyone or Patrons Only?
user avatar
castnplay - 7 Jan 20 14:47
Anyone! As long as you use 90% or more of our models.
 The Cursed Crew: Release 4
The Cursed Crew: Release 4more_vert
2019-11-29T16:48:50+00:00
Post file flag
The Cursed Crew: Release 4 2019-11-29T16:48:50+00:00close

Guys! The final release is here!

We hope you've enjoyed this collection as much as we did creating it.

We're already working on next month's collection expect a couple of teasers in the following days.

You can find the complete collection now in the archive.

LINK TO THE ARCHIVE


You're really awesome :D

Happy Printing!

Comments (16)
user avatar
User #16076338 - 10 Dec 19 21:41
I'm nearly done with printing the Hull. Theres alot of pieces! But so far so good. 1 question, on the hull pieces the top is very weirdly cut. I might be the only one who thinks so tho. Once I'm done i'll post a pic :)
user avatar
castnplay - 11 Dec 19 02:36
Yes, please post that picture so that we can solve the issue :)
user avatar
User #26323081 - 31 Dec 19 07:52
Did anything come of this? I'm printing the ship now and noticing how odd the cut is on the top of the hull. I'm assuming it won't matter with the upper layers after they are placed on though.
user avatar
castnplay - 31 Dec 19 15:05
Yes, we fixed it. Did you download the latest version?
user avatar
User #16076338 - 31 Dec 19 15:36
No, I was waiting for someone to answer to the post I did on the facebook page. Is it possible to have a link to redownload it? Thanks
user avatar
User #20588467 - 30 Nov 19 03:23
Question: What type of Monster would the Floor Scrubbers be categorized under?
user avatar
User #26676065 - 30 Nov 19 13:15
They look like Imps to me. Or Kobolds.
user avatar
castnplay - 1 Dec 19 14:46
Yeah, they're imps :)
user avatar
User #23265352 - 2 Dec 19 01:18
Since they have no wings to be a normal Imp, I am considering them as demonic goblins. :p
user avatar
User #23265352 - 2 Dec 19 01:18
When will the throwbacks be updated?
user avatar
castnplay - 2 Dec 19 03:15
We just finished updating the folder :)
user avatar
User #16295073 - 23 Dec 19 09:56
Hi! I just discovered your channel and most of the minis i wanted were the pirate ones. Is there a way for me to access or purchase those?
user avatar
castnplay - 31 Dec 19 15:05
Absolutely. They're all at www.gumroad.com/castnplay and www.myminifactory.com/users/castnplay
user avatar
User #10376174 - 29 Nov 19 17:04
I know what I'm gonna be printing the next couple of days 😂😂
user avatar
castnplay - 29 Nov 19 17:09
Please share pics once it’s finished :D
user avatar
User #10376174 - 29 Nov 19 17:09
I will
UPDATE ON THE MY MINI FACTORY PAINTING CONTEST
UPDATE ON THE MY MINI FACTORY PAINTING CONTESTmore_vert
2019-11-28T21:48:20+00:00
Post file flag
UPDATE ON THE MY MINI FACTORY PAINTING CONTEST 2019-11-28T21:48:20+00:00close

The prize has been updated! We will now be giving away a My mini Factory Limited Edition Elegoo Mars to the 1st place!

For more info go here:

https://www.patreon.com/posts/end-of-year-31446361

***On a side note, we are preparing another contest that will run at the same time as this one. Yes, an FDM ONLY CONTEST. The 1st place will get an Elegoo Mars as well (not limited edition). More info coming on the FDM Only contest coming on Saturday.

Cheers guys!

Comments (6)
user avatar
User #23854675 - 29 Nov 19 03:59
That's awesome prize support!
user avatar
User #23854675 - 3 Dec 19 14:52
So excited finally getting my first printer on Friday so I will be entering this contest! If I win I would be floored!
user avatar
castnplay - 3 Dec 19 15:32
Can’t wait to see your submission! :D
user avatar
User #18928798 - 28 Nov 19 21:53
Now I want it even more!!!
user avatar
User #6147918 - 29 Nov 19 04:36
so two separate entries then?
user avatar
castnplay - 29 Nov 19 04:38
Yes!
The Cursed Crew: Wave 4
The Cursed Crew: Wave 4more_vert
2019-11-27T17:50:30+00:00
Post file flag
The Cursed Crew: Wave 4 2019-11-27T17:50:30+00:00close

Hi Guys!

Our final release is almost here, with an awesome ginormous Undead Pirate Ship, and a cursed soul pirate bound to it for eternity.

***IMPORTANT***
This fourth release will count as 2 slots in the archive:

  • 128_Ghost Pirate
  • 129_Undead Pirate Ship

That means that the following will be gone during the weekend:

  • 116_Dwarven Riders
  • 117_Fire Giants
  • 118_Stone Giants

***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

Lastly, if you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

We've loved creating this month's models for you guys.

Cheers!


Media (1)


TCC_Release4_glossary.png (3.9MiB)

Comments (16)
user avatar
User #23854675 - 28 Nov 19 02:05
just Wow!!
user avatar
User #22519530 - 27 Nov 19 19:42
Will the ship be in parts and maybe sectioned? Us resin guys have small plates. Also will there be a flat bottom version so the ship will look as if in water when placed on the play area? Looks great!\
user avatar
castnplay - 27 Nov 19 19:43
The answer to all of those questions is yes.
user avatar
User #4447395 - 27 Nov 19 19:51
I haven't printed any of your larger items. Do you use positioning and orientation tabs?
user avatar
castnplay - 27 Nov 19 22:32
We're not using pegs for this one. Some of the vehicles do have them, though.
user avatar
User #9173795 - 28 Nov 19 23:12
Any chance you could do more of the floor scrubber imps. I would love to have a whole range of them with swords spears slings etc. Those are some of the coolest imps ive ever seen!
user avatar
User #26779988 - 28 Nov 19 09:39
Will the ship have some sort of interior, or is it just hollow on the inside?
user avatar
castnplay - 28 Nov 19 21:48
It has interior, but it's nothing out of this world. Just somewhere you can place a couple of minis.
user avatar
User #17940371 - 1 Dec 19 18:34
Hey this thing is really great! Before I start printing, I wanted to float the question of possibly having a 2-part hull file.. split right through the middle (side to side) - I know a lot of us have Ender3 or similar-size print beds and I think that would be a great way to print the bulk of this ship! I would probably still print the mast and other details on my Mars, so if it was JUST the main part of the ship that would be great! That last bit is the only reason I'm asking instead of just splitting the file you provided myself, btw.
user avatar
castnplay - 2 Dec 19 22:20
Hey Jesse. We'd love to do it, but right now we won't have the time. We're working hard to finish the next collection before the Christmas break so that we can have a couple of days off. Usually, we would just go ahead and do it, but this time we really have no time to spare. If you can wait till next month we can cut it that way for sure.
user avatar
User #10376174 - 27 Nov 19 17:55
Ooh it feels like Christmas already
user avatar
User #9663706 - 27 Nov 19 19:45
That ship is awesome!
user avatar
castnplay - 27 Nov 19 22:32
Glad you liked it! :D
user avatar
User #25136101 - 27 Nov 19 18:05
Is there a pinned post for download links?
user avatar
castnplay - 27 Nov 19 22:32
here it goes https://www.patreon.com/posts/25749113
user avatar
User #25526714 - 27 Nov 19 18:01
Ahh... it’s his long beard not tentacles :D
The Cursed Crew: Release 3
The Cursed Crew: Release 3more_vert
2019-11-22T16:55:44+00:00
Post file flag
The Cursed Crew: Release 3 2019-11-22T16:55:44+00:00close

It's Friday! Time for the third release of the month!

You can find all these models in the archive right now.

Thank you a lot and please, consider sharing with us on Discord or Facebook your prints. It helps a great deal to spread the word.

LINK TO THE ARCHIVE

Enjoy your weekend and

Happy printing :D

Comments (5)
user avatar
User #25515964 - 22 Nov 19 18:52
So I'm new to Patreon - did I miss a lot of stuff by joining at the end of the month?
user avatar
User #20735989 - 22 Nov 19 23:25
No, all the "New Releases" for the month are available to you. Download those first then download the "Throwback Files" because they change monthly and finally the "Welcome Pack" files that are available whilst you are a Patreon of Cast & Play :-)
user avatar
User #25515964 - 22 Nov 19 23:28
Ah cheers, thank you Sean
user avatar
User #8090331 - 23 Nov 19 16:52
Not really. You can access all the files for everything from this month and most of the previous one still, the oldest release cycles out as the newest models are released. You can still get a lot of them through the monthly throwbacks, too!
user avatar
User #4391232 - 20 Dec 19 17:37
Holy crap, I had no idea the throwback files changed every month!!
The Cursed Crew: Wave 3
The Cursed Crew: Wave 3more_vert
2019-11-20T18:00:38+00:00
Post file flag
The Cursed Crew: Wave 3 2019-11-20T18:00:38+00:00close

Hi guys! It's time to see what's coming this week! :D


This third release will count as 3 slots in the archive:

125_Undead Pirates Beast

126_Canon Props

127_Cursed Crew Bases


That means that the following will be gone during the weekend:

112_Halloween Warrior

113_Pumpkins

114_Dwarven Entrance

115_Ground Bases


***MAKE SURE YOU DOWNLOAD THEM BEFORE THEY ARE NO LONGER AVAILABLE***

Lastly, if you have a friend or family member that you think would like to get those models, this is their last chance. So, please help us spread the word!

Thanks a lot for your support!


Media (1)


TCC_Release3_glossary.png (5.6MiB)

Comments (11)
user avatar
User #860642 - 21 Nov 19 13:40
Love the crabs
user avatar
User #2360580 - 20 Nov 19 23:12
The link doesn't seem to work for me. Anybody else?
user avatar
castnplay - 21 Nov 19 01:30
Try getting rid of the first part of the link, up to ‘www.’ Sometimes some browsers won’t open the full link.
user avatar
User #12457717 - 22 Nov 19 16:55
What do we do if some of the previous models we got, came out corrupted when we downloaded them and now they are taken off the monthly list?
user avatar
castnplay - 1 Dec 19 14:50
Send us a DM, we'll help you out :)
user avatar
User #12457717 - 1 Dec 19 15:22
You guys hooked me up on Facebook. Thanks again;
user avatar
User #16188731 - 20 Nov 19 18:02
We getting a ship???
user avatar
castnplay - 21 Nov 19 01:30
What would a captain be without his ship?
user avatar
User #3486541 - 20 Nov 19 19:24
Ah, nice. Now I'll have bases to go with my Captain I've printed 👌
user avatar
castnplay - 21 Nov 19 01:31
Hell yeah! :D
user avatar
User #8090331 - 20 Nov 19 18:01
Crab... Battle...
Upload

This creator doesn't have any shared files yet. You can add some by clicking Upload.