Hi there, Here is the 5th fairy, part of the Unseelie Courtas well,
The Pre Supported version will arrive in the next days as well while the fairy04 Pre Supported is now online!
The last Fairy will arrive in a couple of days or so.
Also a poll will be up tomorrow for you to select your June favorite!
We hope you enjoy using it. yiff.party operates on a non-profit basis, and as such, all the server expenses are paid by our users. We don't want to run ads or infect you with crypto miners. We depend on users like you to keep the site running, and to preserve years and terabytes of amazing content—some of which is no longer available from its original creators!
Because of the nature of the site, many users are reluctant to donate. That's OK! yiff.party was created so everyone can enjoy the content we host without any restrictions or paywalls. But if you value the service we provide, and are able to, we—and our users—would be tremendously grateful if you considered making a donation.
So far, approximately $111.38 has been raised out of our target of $250.00. We're about 45% of the way there! Please note: this tracker is updated manually—don't worry if your donation doesn't show up immediately!
yiff.party's server costs are due on the last day of each month. So, we need to meet this goal before 31 May!
At this time, yiff.party can only accept donations in numerous cryptocurrencies. Please select a currency below to display the relevant donation address.
Due to the nature of sites like yiff.party, it is very difficult to find payment processors who will accept clients like us. If we were to accept donations via PayPal, it wouldn't take more than a day for someone to submit an abuse report and get our account frozen. Until a viable way of accepting monetary donations becomes available, cryptocurrency will remain the only option.
There are many resources available on how to purchase crypto. For Bitcoin, check out bitcoin.org's page on buying Bitcoin for a list of methods. For beginner Bitcoin users, yiff.party recommends using an escrow service such as LocalBitcoins.
1 / 3
Hi there, Here is the 5th fairy, part of the Unseelie Courtas well,
Hi there, the fairy 04 is now available on the dropbox
The presupported versions will arrive in the coming days once test printed, while i ll be working on fairies05 and 06
Others weapons will arrive on the next fairies and will be modular on this one as well :)
Also i suggest you put this one on base06 as she is suposed to be floating but you are obvioulsy free to make her float your own way using any tricks or bases or magic:)
I see you really soon for the others fairies.
Hi there gang!
Here is just a screenshot about the next fairy part of the Unseelie Court!
Still some details to add such as bones and skulls! Also the weapon to make. She will be available during the week end!
Hi there Gang, I just come back from a 4 days break to end the lockdown, enjoying a bit the countryside .
I had the time to sculpt the Unseelie court bases and start working on the fairies as well.
Bases are already on the dropbox and should give you a hint about the look of the upcoming fairies. Those are sized 20mm but feel free to scale them just as you want!
First one should be here before the end of the week!
The last member of the seelie court just arrived on the DropBox
She is floating and you should be able to glue her foot on the mushroom or the tree stump of base03:)
The pre supported version is up as well already!
Now i will start to work on the Unseelie court for the next ones!
HI there gang!
It has been a long road but i have finally found someone very very talented with supports!
This tiers comes at 10$ i think 1.50 for supports like those is really worth for everyone who want to print easily the new models!
Here is the first fairy printed using those supports on an Anycubic Photon S with their grey resin. 0.03 layer height.
Supports come free quite easy afte a warm soak, however the wings and ears being delicate, make sur to use w proper clipper so remove supports on those areas instead of pulling hard:)
By the way those photos show a model Without any post cure cleanup!
I have added one fairy in the current may dropbox "Fairy01_Test_PreSupported"
For you to test it. This one comes already fully attached but everything else is separateley supported if you subscribe the new Baron Tier
Also note that the pre supported files will always be available a bit after the regular STL, time necessary to make the supports ^^
Let me know how it goes, and what ou think!
Hi there gang, i am doing new stuff and i like it,
I made 3 bases available on the dropbox.
They are currently 20mm and fits with the actual size of the fairies but feel free to scale them just depending your needs
Hi there, here a screen about the next fairy that will complete the seelie court
I made this one in a floating position so i am making a base as well, i will probably do others bases on the fairy theme this month as well s it is not too long to make!
I should finish this one by tomorrow, i still need to change the face, add some details in the hairs, complete the base and make he a weapon set as well!
Finally the pre supported tier will arrive during the first part of this week!
Hi Gang, how is it going?
I just uploaded the fairy n°2 on the dropbox
A third one will come soon as well to complete the seelie court
I hope you will like it!
Hi there, again a screenshot showing progress on fairy2, it should be available in 2 days i think. Still have to make another face as it is the old one and i'd like to make another expression, also have to make the weapons sets and add some details flowers and such
Also, I had some feedbacks from my support guy and a patron, on fairy one so I re uploaded a new version, I have replaced the old one, so make sure to get it:)
Here is what i changed:
_wings are now attached to the body as the sockets were too small and they ain't gonna be modular anyway
_I have changed the a bit the arm wrist by making the bracer bigger and changed the socket as well to make it easier to clip if you print pieces separately, you can see it on the 3rd pic
_added a set of empty hands
Hey gang, We're starting May right away, the patreon took a small hit the past month so no time to loose!
I hope you will like this one. Some sisters of her will arrive in the coming week as well
On the news side, I have found a new support person and this one is a pro!
The first presuported model should arrive in the coming days as he is in test print phase right now
The pre supported tiers will be only 10$ at the end! hoping to bring more people with the time and the quality of work.
Also do not hesitate to share some pics about your prints or even talk about it to help the patreon grows, it is always much appreciated.
I'd like to pass the next step and It will works THANKS TO YOU!
For this beauty, you will find the dropbox link in the next post:)
Thanks for reading,
Hi gang, another screenshot to check the progression of the 1st fairy.
She sould be available soon as May is about to start, proably on the 3rd of may.
Still have some details to work on like finishing leaves, make wings, adding the weapons (will be book and spell for this one) and add some crispy details such as flowers and stuff ( just like for the head)
I am pretty happy with this one, specially cause I ve made it quiet fast, meaning im getting better :)
As always, let me know what you think.
Hi there just a screenshot before i go to sleep:) I worked on the first fairy today,
I will probably go with two families of them to represent the two main courts i heard about in the poll :)
The first one will be full of nature and flowers representing life, So far i have planned 3 by families but we ll see how it goes :D.
As usual let me know what you think,
Also as i don't see them those ones as warrior really i still have no idea if i should give them weapons or something else, let me know if you have suggestions, always a pleasure to read.
Hi everyone, here is a new discount code valid until the 11 of may,
Date where the lockdown is suposed to end in France; even if i don't really trust it :(
This code is valid on all the products and is nice way to get old releases if some of you want to .
It gives you a 45% discount instead the classic 30% : xdvl3rn
I hope you are all doing ok where ever you are and keeping you busy to not become crazy.
Hi everyone, just a small message to wish you a good week end and to remember patrons to vote for May Poll as I see 90 votes so far
Fairies are ahead but anything possible :)
It is here in case you missed the post
Hi there, I added the last heads in all the folders, called head05 and head06.
i went for parot and vulture style for a change :)
Also I probably won't make all heads adaptive on all the bodies for the next release as it takes a lot of time and more technical than artistic part. Don't get me wrong it won't prevent me of doing different heads ,just not mudlar on every minis, I prefer to take that time to make more minis :)
Hi there, while I am finishing some bird heads for april here are the choices for May gang!
As always, the comments are welcome for any suggestion or thought you have :)
I just added the ranger to the dropbox. You will notice I also took some elements from previous release for this one:)
Also I will not make a 5th Aarakocras as I would like to start on the next release as soon as possible.
However I will add 2 new heads type to the collection and adapt them to the existing minis. I will also make a small scatter to add to the starter pack:)
Making everything modular takes a lot of extra time so we ll see for the next releases, weapons will remain modular for sure though.
Finally one of my goal would be to make the content of an entire monthly release available during the first part of each month and not droping until the last moment >< so i will be working hard enough to make it happen in June.
A poll for May will arrive tomorrow as well that i can start working on it asap:)
This monk is now available on the dropbox !
A ranger should arrive soon and I will probably have time to make a 5th mini as well with a new head:)
Hi there gang,
Just a small Wip Image about the next Aarakocras.
I decided to go for a monk before a ranger for this one as I never did one before,
This one should be available by the end of the week end as I still have things to add such as weapons, some more feathers and the clothes to finish.
Hoi gang while i am working on the next two minis, I 've finished the next heads already.
They are already available for the first two minis, and are named Head03 and Head04
I went for a raven type as I am working on a rogue and archer and figure it would be a good fit:)
Hi there everyone, here is a second Aarakocras warrior ready to print for you. Available on the dropbox for April.
I wanted to make a second guard/warrior with another set of weapons and a new head variation
This second head is also currently uploading in the first warrior folder as well for modular purposes.
You can also switch the weapons from one mini to another:)
I am now focusing on different birdstyle head for the next one hehe and he won't be a warrior in metal
Let me know what you think, and spread the word :)
The version fo the first one is finally up with Modular wings,
Now than I got that pair i can slighlty change the shpae ans use them fo all the others incoming minis
Finally first one of the serie is on the dropbox
(see next post for link)
I am still finishing a pair of wings atm but a seconde version with and the "winged" version should be available tomorrow or so.
After that the others ones should come out a bit faster now that i got my base :)
As usual let me know what you think! same if you ahve suggestion for the others
Here is a second wip image about our next mini.
I am almost there for this one, taking a bit longer as it is the first one, I am making sure to make everything moduIar
Indeed, I have decided than everything will be modular, heads and weapons but even a pair of wings to add !
Should be available in a few days :)
Hi Gang, here is a WIP image about the next Aarakocras, still have to finish few things about the anatomy that should be done by tomorrow alongside the wings structure. Then it will be time to add feathers, i have already prepared some single feathers to use:) .
I pîcture them taller and more slender than an average human.
I will probably make different heads to represent some different type, not sure if they ll be modular though depending how can i cut them. The weapons will be modular for sure though!
The first one should be out by the 3rd of the month as usual.
Hi There Gang, the starter pack is now available for all patrons
It contains some single props that you can use as tokens or to simply add on some existing models.
Also I started a small market stall that i will make evolve when I'll have time . I started a merchant miniature but didn't have time to finish it yet as it was quiet a busy month between the dragon to sculpt and this Covid-19 context. I hope you are all doing ok with this madness.
Now it's time to start the next release that will contains Aarakocras as the people are voting massively for those birds,
Let me know what you think gang,
Hi there everyone, the poll for april minis is finally here
Also I wanted to let you know that i plan to change a bit the patreon releases in term of content for futur releases, I only make adventurers character to play or ennemis for encounters so far and i would loveto create some props and unique pnjs as well.
Indeed lots o f your uggestions for the starter pack concerned cities and townfolks
It means than the releases would be divided between those you should expect:
_ 3 Modular Adventurers with a mount or enemies creatures
_1 or 2 unique NPCs/townfolks and some appropriate props to go with this one ( ex: a blacksmith with his forge)
Also I am currently working on a city map with different areas, the idea would be for you to vote each month to decide wich part we unlock for the pnj and props
The Idea would be to split those into two different tiers in one or two month if you like it.
Adventurer tiers would be 6 dollars and NPC would be 4dollars,
both tiers would be 9 dollars
Let me know what you think while voting, this change won't wome before May anyway.
Hi there gang, how are you doing with all this sickness and madness?
Here is something that should keep you busy for a while!
The Big boss dragon is finally out. You will find him on the dropbox in March
I decided to turn this one into a Mineral/Rocky dragon. A few dragons have been released already by some others great artists in our community so here is my takeon one to give you another choice.
This bad boy is cuted and keyed as it is a big piece and for an smoother print!
A new goal will appear really soon as I really like to work on bigger and more detailed pieces!
As usual, Let me know what you think!
Ps: I will start to give some pieces fromthe starter pack this week as well !
And a poll should arrive as well to decide what do we work on in April!
Hey gang just a shot of the dragon boss coming up.
I am done with the anatomy and I started to prepare the scales i'll use on this guy.
He should be done and available in two days or so.
I also made some single itmes aready for the starter packand i'll start to give it away once the dragon is out.
Have a good week End!
Hi Guys I finally made all the heads available for pretty much all the dragonborns minis.
You will find a folder named "Dragonborn_Heads" on the March dropbox,
MAke sure to pick one for the corresponding mini :)
You ll note that the head02 is not available forall the bodys as it has large fins,
Hi there New discount codes for the shop valid for the entire Month.
This one give you 40% on the entire shop : lxporyr
This one is for -50% but only for the Dragonborn part1 Pack: l3c11e1
Ok Gang, I am finishing to fix my back but I am now able to sit and work with some streching pause from time to time
I have uploaded the mounted Unit.
I will be finishing the Big Boss Dragon during this week and it should be available by the end of the coming week, I am changing a bit some stuff as I saw many great dragons already and you start to know me, i like to be a bit original
Also I have been able to start working on the starter pack makiong small indivudual items so far, I will start to release everything once I am done with the dragon.
Please check the next post with a new link for Mars as well
Here is a new suggestion board for you to give some ideas about what you would like to see in the starter pack.
Keep in Mind that it should be general stuff that any adventure could benefit, i mean by that no such thing as "sea creatures" or so.
So far I have already prepared a caravan shop with a merchant and his stuff :)
So I f**ked up my back badly and I am currently unable to sit, walk and work without screaming because of the pain :)
This bad boy will be delayed a bit, time for me to sleep of the pain with some heavy painkillers :)
It is a female version of the warrior, I am almost done should need 1 or 2 more days of work once i will be able to :) The weapon will be a gigantic spear with a banner part.
All the payements have been frozen for March, you should see a message on the page.
Also I am opening a new suggestion Board for the starter pack as many of you ask me about what is going to be inside :D feel free to participate
The Dragonborn 8 Is now available on the dropbox.
The druid class has been asked by some of you so here it is.
You will notice I used some elements from past release but it suits him so well :)
I am also making a new folder with all the heads adaptible for all the previous models and this one, it should be available tonight, I'll let you know
The last mounted Unit should be available in 2 or 3 days!
Let me know what you think as usual!
Hi Gang, I had to deal with some stuff this week and February Is going FAST, So I had to re schedule some stuff as Rg Sculpt is a ONE man Work.
First of all no worries, everything will come.
_I will release two others minis before the end of the month:
One mounted Unit on the drake and a last type for another dragonborn mini.
_The big dragon will be delayed for about a week. Should arrive by the 7th of March
I have started to work on it but as it is the bigger piece I have worked on so far, I really want to make it special to thank you all and the last thing I want is rushing it because of time.
Here again no problems, EVERY supporter from February and March will have it.
_For March, I will FREEZE all paiements, it means you won't have to pay.
I will use this month to finish the Dragon but also FINALLY make the famous Starter Pack available,
Let me know for any questions.
Hi there, the drake is now UP on the dropbox
I really pushed this one in details as it was also a test dummy for me on how i will make the big dragon
I am currently preparing a cutted version as well if it can help some of you, it should be available by tomorrow.
As usual let me know what you think!
We are already quite deep in Februrary and I had to change a bit the organisation of the month cause of personal matters.
I invite you to read the next post to know what's coming next and for March!
Hey guys and girls,
Here is a quick wip of the drake, I am finishing anatomy at the moment.
Head is just a placeholder atm.
A first version with no unit on it should be available during the first part of next week, once i have put all the scales :D
This deadly dragonborn is now on the dropbox, currently available with daggers , a one handed crossbow.
Tomorrow, I will add some metal claws as well and also make the others heads available for this model.
I hope you will like it
Hey Folks, I hope you are having a good week end,
I just wanted to share a wip of the next dragonborn which should be available on Monday.
Time for me to finish sculpting the scarf, add some details and make some weapons, it should come with poisoned daggers and a small crossbow
This new head is a bit agressive for a female type but i guess you don't want to piss this one off!
Let me know what you think.
The first dragonborn of the month is now on the dropbox.
It has only those weapons so far but the others ones will be uploaded tomorrow, i just have to make them ready for printing!
Same for the older heads, I'll cut them for this model tomorrow
Edit: All the weapons and heads have been added for this one, I see you soon for a second one
Here is the link for the February Dropbox.
Everything during the month will be uploaded on here:
Here is a Wip image of the first female dragonborn,
I really wanted to make a second caster but focusing on the healing/supporting part.
Every party who want to mess around need one in my opinion :D.
I just have to add a few more details and a weapon set focused on support. It should available on the dropbox tomorrow.
Just a smal wip to show comparison between the 2 genders.
I' ll release two women class type during this first week of February before working on the mount. the classes are secret for now, i don't want to spoil everything :)
I was reported than the mage staff was a bit too thin . It seems that he was a bit twisted once printed
I made slightly thicker version if it can help some of you.
here is a link to download the new version.
Just a small post to keep you updated on what is coming in February.
You have mostly voted for a second round of dragonborns.
Don't worry Loxo fans, they will come back on a next poll.
So here it what you can expect :
- Female characters
- New classes (what? yes new heads again)
- A mounted Heros (still figuring a good ride for a dragonborn)
- The big boss to celebrate the 150 patrons goal, a ancient dragon
So busy month as you can see, as usual the first models will be available around the 3rd of February like the other months
Finally here is a code for the shop that will give you a 50 % discount on all the products on the shop It will be valid untill the 10th of February: o32f9s5
This is to thank you all to supprot my work and a good opportunity for all the new comers to get some old releases if interested
As usual do not hesitate to ask for any questiond you might have!
Hello everyone, we passed the 150 patrons goals!
Thanks a lot for supporting my work! This is really rewarding and it motivates me to continue and always do better!
All this thanks to you gang!
As a thank you I will make a special big boss "miniature" that would be released in February!
It will be a badass ancient Dragon with a piece of scatter.
I wanted to make a poll at first but a dragon will completes perfectly the second dragonborns crew.
Hello everyone. I just uploaded the mage.
he comes with a new head again and with some several spells abilities, you can also swap the weapons with the old ones
Make sure to read the second picture as usual for the names of each part
This one concludes the January release and I'll see you very soon with some new stuff for february. There will be a post once the poll is over to see what you can expect for February.
Hi there gang!
Here is the poll for february, more open than the previous one, the choice is yours !
And as always, any suggestion is welcome even if i can't do Everything at the end :D
1 / 3